Making the perfect Spidey suit

[bugeyed]

If you dont want to wait for me to find someone to post them i can email them to you. PM me your email if you want.

[spiderman5]

They had their suit on a statue, so I guess it was sculpted. Unless your asking about the one Ben wore, im not sure about that.




Bugeyed i'd like to see those pics.


Anybody know how bobby/ ben do their boots?

[blaze269]

Thanks for your compliments guys. I just figured I would give it a try at lightening the mood around here some. As for SpiderHam.........I really can't answer ya on that one.

[tbx_moto]

Depends Tbx,

Regular liquid latex also called slip casting latex works great and I have never had a line break. As for Cold and Hot latex, both are foam latex and the hot really has minimal advantage over the cold other than it's cheaper. The colds advantage is you dont have to find an oven big enough to cook it (depending on the size of your molds). With The size of the webbing mold your looking at unless you cut up the chest and head youll need what a three foot oven. If the oven isnt an issue deffinetly go hot foam.

The place I'm getting it from supplies regular liquid latex, they said its for making masks.

Is liquid latex and foam latex the same thing?
I can't tell you an exact size of webs, but how much did it cost you?
Do you have any pics of your webs, close ups would be awesome.

[bugeyed]

Yeah I have some close up pics but again ill need someone to post them or PM me your email and i can send you them.

As for how much latex... First let me ask you this, are you making a costume just for you or are you planning on selling some. I ask because latex usually comes in gallon jugs, some places will give you pints. If you don't need that much though I have a recipe and you can do a full suit including spiders for between 7 and 14 dollars. The webb pic i have has webbing made from this recipe, I've been using it for over five years and the latex is awsome with great stretch. The same recipe with a bit of tweeking also makes the paint for the final peice.

So let me know what you're thinking.

[bugeyed]

Blaze,

great looking suit and pose. You may have a young photographer on your hands. Is that a Ham S-M 2 suit or did you change the spider?

[Orlando Spider]

bugeyed, Now YOU have a pm

[SpidEMC]

hey Guys I am still around LeeMat.- Said I was getting quiet. Not really just been busy with the last chunk of the first book before we go to the final edit.

-God I kid none of you one bit. The editor enhanced this book to a great level. I don't think any of you will lose your attenntion while reading this. Other books are peppered with a lot of Potatoes this Book is different it is packed with Meat and very few Potatoes. This idea and character should break a good deal of new ground. (Prepare yourselves)

Knight Seeker

[blaze269]

That's a Ham SM2 suit.

[leematthews]

Fantastic suit Blaze,

Nice to hear from you Eric & German Spidey! (the story about the underwear made everyone in the department where I work laugh in our lunch break!).

Look forward to seeing the new improved Knight Seeker costume Eric.

[SpidEMC]

Fantastic suit Blaze,

Nice to hear from you Eric & German Spidey! (the story about the underwear made everyone in the department where I work laugh in our lunch break!).

Look forward to seeing the new improved Knight Seeker costume Eric.


I started talking to my designer in Philly, Oh yeah (GO EAGLES!!!) but anyway we will start drawing up the plans in MID feb of how we want the suit to fit and be constructed.

Knight Seeker

[jawatrader]

I started talking to my designer in Philly, Oh yeah (GO EAGLES!!!) but anyway we will start drawing up the plans in MID feb of how we want the suit to fit and be constructed.

Knight Seeker
Cant wait to see it and read it. Please keep us all up to date on the progress of the book and where to buy a copy when its done.

[SpidEMC]

no prob :)

[hanielroswell]

[QUOTE=bugeyed]Blaze dont even jump Joe and I. It's your buddy Haniel that keeps making comments. My whole point was to stop this crap.

sure you did... (speaking in a sarcastic tone)

haniel roswell

[hanielroswell]

Just keep on proving my point partner.

oh i will, dun you worry about that. you just continue running your mouth on and on the hype and you can expect me to be here waiting, keyboard at hand.

peace

haniel roswell

[hanielroswell]

I wish you friggin people would just knock off this damn bickering. Joe, bugeyed, sheesh chill out!!! This is just rediculous. If you have something positive toward the real nature of this board, then say it. If not don't waste your time, much less ours.


AAAAnyway...........Yeah my lil girl loves her dad........And spiderman. She used to be afraid of me in my classic suit so I sold it. She loves this one though. She's my little helper when it comes to zipping up, or unzipping along the back.

i couldn't agree with you more blaze. it is people like them which give the hype a bad name. but let's not get caught in the snare of their impunity. we are well matual adult here. and as an adult we must set an example for other to follow. i'm sure the moderator would not be too please if we continue this little masacre. you and i both know that the hype have no place for bickering so let them have their fun.

btw, i would like to announce that my pattern came out of the printer today and it is AMAZING! the colour is crip and clean and the detail on the suit just blew me away. since i dun have a digital cam, it would took me some time to post some picture here on the hype as i need to see if any one of my friend own a digi cam.

peace

haniel roswell

[hanielroswell]

Cant wait to see it and read it. Please keep us all up to date on the progress of the book and where to buy a copy when its done.

can't wait emc. i'm sure it's going to be great.

haniel roswell

[joemillions]

Speaking from a Moderators view Han, keep the critisms off the board. I have done... No one even cares anymore so your just wasting bandwidth and your time. If your really in tune you won't even reply to this.

End of.

[SpidEMC]

Lets stop it right here right now. I really did not want to say anything but enough is enough. I say let them talk about what ever, I say if you produce and you show your work you are more of a contributor to this thread, if someone one talks bad about you I say BUMP THEM, your work is what is what give you worth on this board. Not saying noone can not give a HELPFUL CONSTRUCTIVE View of your work.

So just let it go Bros this is getting silly.

[joemillions]

How do you see me or others not trying to stop this. I stop letting my feelings not been known, on the other Han goes and starts off by saying something else. It really looks like Han gets freedom of speech here or your so far up his arse. I mean look at all the posts in Haniels history. Has anyone ever put him in his place.

What you should of said was...( if your on his side)


Yea Joe's right, Haniel make yourself look the better person by not posting that way everyone should stop arguing- - don't make out like it's moir causing all the problems and it has nothing to do with Haniel.

Do the maths.

[Spiderkes]

HELP!
I need a corrected pattern! I am too lazy to correct it myself :)
No, I just don't know a thing about photoshop. Can anyone help me? Please PM me for a deal.

Spiderkes

[bugeyed]

Quote:
Originally Posted by bugeyed
Just keep on proving my point partner.



oh i will, dun you worry about that. you just continue running your mouth on and on the hype and you can expect me to be here waiting, keyboard at hand.

peace

haniel roswell

But we're the ones talking crap...seriously i think you guys are c@ck whipped by this guy with his secret source (his DVD). Peace out you all I dont need prove myself to a loser that needs to live on a computer until his F%cked up face gets reconstructed.

And Haniel work on your english you D%mb Fu$k!!

[Orlando Spider]

What Han does is he mixes his critical, retaliatory responses w/ comments that ARE on topic. Furthermore, i think he responds to every post that has something to do w/ him (or that he has an opinion on), regardless if we've moved past it or gone beyond it. That fueles the fire again when he does.

Han when you read this thread, do you read in order, respond, and then go to the next post? If you do i'd encourage you to stop. Change your habit to reading everything all at once... make sure your response won't start anything again, and then respond.
Finally. Anyone on here who has been criticized for being critical/ abrasive, IS GUILTY of it. Primarly because of posts that would be considered personal attacks. I don't think the people involved understand the point that i've been trying to make all along. IT DOES NOT MATTER if someone attacks you personally.

You don't have to respond in retaliation. and the second part of that, YOU DONT HAVE TO ATTACK ANYONE TO BEGIN WITH.

Enough is enough you guys. If you feel like you have been attacked, and want to make a comment on it, be mature and use the PM. Don't involve the rest of the hype.

I don't know how many times this has been said, the guys on here act like little kids, constantly being reprimanded... then going right back to what they were doing. Is it going to take drastic measures on a moderator's part to help you learn that YOU JUST DON'T GO THERE

[SpiderManYetter]

I'm done..... this is unbeliveable. This thread has gotten pathetic just like some of the people here.

[tbx_moto]

Yeah, how many of these lectures are we going to get?
Hey, yetter do you have a blown up pic of your avatar. I need a new design for my front spider.

[amazingheroes]

ssooooo how about those Eagles? TO TO TO! Can't we all just get along???

[tbx_moto]

For liquid latex, can you just let it sit, or do you have to put it in an oven?

[Spiderkes]

Hey Yetter,
would you happen to have a front spider for me? Yours is the best, could you tell me how you made it?

[Orlando Spider]

Hey, here's a question for everybody!!!

If you have a suit that you've made...
how many hours of work have you put into it?

I think i put around 30 total into mine.

[spidyfan43]

thats about the average time for my costume too. 30-40 hrs

[spiderman5]

ssooooo how about those Eagles? TO TO TO! Can't we all just get along???

I hope the Egles loose. I live in Atlanta, and im still not over the playoffs.

[Orlando Spider]

See, now that what uncalled for

[X-Cloned]

spiderfreak2 - PM sent, I shan't speak much futher and turn the forum into a mess.

[tbx_moto]

x-cloned, you're a 12 year old gothic star wars fan who makes lightsabers, does 3d modelling and photoshops everything and you live in switzerland and youre like korean. That's quite a combo.

[Orlando Spider]

-.-

[amazingheroes]

hey ya'll, I got my new suit in. I'd like to share it..how do I post a picture???

[tbx_moto]

Does anyone know how all this fighting started?

[OVDH]

Xeno lives in Singapore. Liquid Latex dries at the air, you don´t need an oven.

Ollie

[tbx_moto]

Xeno lives in Singapore. Liquid Latex dries at the air, you don´t need an oven.

Ollie

Thank you for responding Ollie, you're one of the few people whose head isnt up their ass. Also, where did you get that steel mesh?

[Kuriatey08]

hey guys

bugeyed, you earlier talked about a mixture for making the webbing. The only thing that I'm trying to figure ot for a costume, is how in the move, they made it so that the edges of the webbing were straight, and like if you use tulip paint, or something like that, the webbing has rounded edges, which I just don't think looks quite as good.i'f someone knows of a mold or something to use, that'd be cool. But yeah anyway, if I could get that recipe thing from you bugeyed, that'd be cool.

chris

[Kuriatey08]

Hey jawa, i recently bought some pattern cd's from you(SKuriata). When do you think I'll be able to get those in? and if I just want to print them to look at them before I get them actually printed, how should I do that with a normal 8.5 by 11 printer.

chris

[Orlando Spider]

Yeah, there are forms/ and molds that have been made for the webbing. SO far i think the one that Ollie (OVDH) is working on are the best so far. Unfortunately, molded webbing like that can get expensive. Tulip is the best bet for cost.

www.spider-costumes.de (http://www.spider-costumes.de/)

has a pretty good tutorial on how to make your own form-molded webs.

[tbx_moto]

hey guys

bugeyed, you earlier talked about a mixture for making the webbing. The only thing that I'm trying to figure ot for a costume, is how in the move, they made it so that the edges of the webbing were straight, and like if you use tulip paint, or something like that, the webbing has rounded edges, which I just don't think looks quite as good.i'f someone knows of a mold or something to use, that'd be cool. But yeah anyway, if I could get that recipe thing from you bugeyed, that'd be cool.

chris

The webs aren't rectangular or straight as you say, they're bevelled. Jesus christ people, get that through your heads.

[Orlando Spider]

TBX, u have PM

[tbx_moto]

napoleon dynamite once said; "God!"

Hey, you know what we need? A basic facts list, so people dont ask stupid questions. No offense to whoever asked about the webs, seriously. I'm just saying we need this so we can prevent future problems and questions that aren't needed.

[blaze269]

I'm with yetter. I am so sick of the BS here anymore. Has anyone ever thought that there is always going to be someone who asks the same question that has been asked before? Yes there will be and so what. Let's just answer it rather than be a ( ) about it.

Yetter I'm comin to join ya bro I'm out.....................................

[X-Cloned]

Correction TBX, I am a 13 year old, living in Singapore, Gothic Star Wars Fan, makes lightsabers and does only photoshop, no 3D modelling. Didn't get to chat much with you on MSN, so sorry.

[X-Cloned]

TBX, you can get Steel Mesh from Hardware Stores or Craft goods stores. They are a pretty good method for lenses.

[Spiderkes]

Steel mesh?

[OVDH]

Hi,

let´s keep this thread on topic with posting pics.

http://img.photobucket.com/albums/v368/OVDH/BackSpider.jpg


Ollie

[Spiderkes]

awesome ollie, how r ur eyes doing?

[X-Cloned]

I believe Ollie uses steel mesh for the lenses. Ollie, that surprisingly looks like my drawing. ;) I have made a few changes though, when you get online I'll show you.

[Orlando Spider]

Looks great ollie, i remember hearing that the edges on the back spider were bevelled as well, i'm not sure if you want to go that far for accuracy, but it would just be even closer to the movie. (i'll try and find a quote for you... i think it's on the DVD)

[Orlando Spider]

How did you secure them the first time?

[X-Cloned]

Hmm, try glueing it over. It might work.

[X-Cloned]

Honestly speaking guys, I am sick of these silly arguements that has been going of for a while. I have created a forum for friendly, community like discussions. I have also tightened the moderation level as well. Here's the link if you guys wanna join. Thanks in advance guys ! ;)
http://spideyreplicas.proboards42.com/

[Kuriatey08]

ollie,

I was just wondering, if you could tell me what you used for that spider for the back, just like what sort of materiael you used.

[X-Cloned]

I believe he used latex, if not polyurethane.

[X-Cloned]

I am not going to post to immature people over here. I am merely helping out someone who wants to know something, because Ollie doesn't go online very often.

[X-Cloned]

I never did make a costume, yes. I admit, but at least I am in the process of making one. If you have nothing better to say, please leave this thread.

[SpidEMC]

posting a pic for
amazingheroes

Nice suit dude

http://img.photobucket.com/albums/v341/knightseeker/Kevinspider2.jpg

[tbx_moto]

Great suit amazingheroes.

Everyone, let's start over with no grudges etc.
Jawatrader, Hanielroswell, Purp, let bygones be bygones. I got no grudges anymore, its stupid to hold them so anyone whos got a grudge, lets start over. We all need help creating a suit, plus we like giving advice. Plus, we're ruining the forum, I'll admit, I'm responsible for a chunk of it. Start over as of now.

Anyways, after some hard work I think I'm almost there for my pattern. Check it out, all I need is to blend the highlighted muscles with the shading in the background.

http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg
I'm zoomed in at 33.3%, just in case anyones wondering.

[X-Cloned]

Amazing suit amazingheroes. TBX, not bad.

[spidyfan43]

:venom: Who made the suit amazing


Come on guys lets all just get along. spiderfreak i made the costume.

[SpidEMC]

SpiderFreak2 YOU Downed the Suit? Hmm can you give me any reason whyor even give the creator Spiderfan43. I think it look pretty good its not a Ham but for the time and the price its pretty damn good.

[spidyfan43]

ya lets see one of your costumes.

[X-Cloned]

Yea, punk, show us your suit, if you even have one. Spideyfan43, THUMBS UP !

[spidyfan43]

Thanks x. he probabbly has no suit. he's just another punk! that doesn't know anything about spidy costumes. and needs go get off the forum.

[X-Cloned]

Spiderfreak2 - First you mentioned I promised it to 5 people, now 10. What a liar you are. If something can't be solved in a civilised manner, I guess I'll have to do it here. Attention older members, remember when I first posted the pattern ? And then I said I was giving it free ? Then I said I decided to sell copies ? I promised 2 guys the pattern, I believe the 2 guys got it. Spiderfreak said I promised it to 5 people, the amazingly increased the number to 10, and he has no names to give to me. What an embarrassment...
Spiderfan43, please join my forum, thanks. http://spideyreplicas.proboards42.com/index.cgi

[X-Cloned]

Spideyfan43 - I agree with you. We should just ignore people like him and get on with our constructive discussion and building of the suit.

[spidyfan43]

very true x. They are not worth our time.

[reveal]

TBX, the areas you did with liquify tool, on your pattern, seem not to blend in with the smaller bricks. The pic that you posted looks really good, but when you take it to photoshop and zoom in, you will see what i mean.

[Orlando Spider]

Hmm, TBX it's looking good. I do realize it's still a work in progress, so it's hard to give criticism if you already know yourself that it's not quite there.
Anyway, the way it jumps off of the pattern it reminds me of those hidden images... does anybody else see what i'm talking about?

[Orlando Spider]

why don't you ask the man himself?

[amazingheroes]

my new suit is great. Spidyfan43 does a great job! It take a lot of skill to make one of these suits..and onyone that puts one down doesn't know how to make one and never has! It's the 4th one that I've owned. It's a great mix of the comic suit and the movie suit...the way it should be..Spiderman was a comic book character first..all you guys talking about colors and the way suits SHOULD be...the suit SHOULD be how ever the wearer wants it to be. Just like in the comics..all the artist draw Spidey in different ways. I've been doing Spiderman parties for a long time and It's all about preference. Check out my suit if you like.. www.MyPartyman.com Good job Jamey!!

[Orlando Spider]

Speaking of SpidyFan43,

Has the Goblin Suit come along any farther?

[jawatrader]

Hey jawa, i recently bought some pattern cd's from you(SKuriata). When do you think I'll be able to get those in? and if I just want to print them to look at them before I get them actually printed, how should I do that with a normal 8.5 by 11 printer.

chris
Hey,
You should have them by the end of the week. Printing them on that size format will be a little difficult. You would have to print out in sections if you wanted it full size.

[jawatrader]

Great suit amazingheroes.

Everyone, let's start over with no grudges etc.
Jawatrader, Hanielroswell, Purp, let bygones be bygones. I got no grudges anymore, its stupid to hold them so anyone whos got a grudge, lets start over. We all need help creating a suit, plus we like giving advice. Plus, we're ruining the forum, I'll admit, I'm responsible for a chunk of it. Start over as of now.

Anyways, after some hard work I think I'm almost there for my pattern. Check it out, all I need is to blend the highlighted muscles with the shading in the background.

http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg
I'm zoomed in at 33.3%, just in case anyones wondering.
Hey TBX...nice work. You are heading in the right direction. Just one word of advice, check the brick work on the txcomics pattern. Yours has pretty good sizing, but you should now think about the flow of the brickwork. It changes direction/angles slightly to help bring out the muslces. Just a little friendly suggestion

[jawatrader]

ya lets see one of your costumes.
Thats a great looking suit. Two thumbs up.

[tbx_moto]

Hey TBX...nice work. You are heading in the right direction. Just one word of advice, check the brick work on the txcomics pattern. Yours has pretty good sizing, but you should now think about the flow of the brickwork. It changes direction/angles slightly to help bring out the muslces. Just a little friendly suggestion

Thanks man, If anyone could help me by sending me some reference pics of the flow then that would be great.

[Germanspider]

you people don't have a clue. I have one of the costumes from the movie. I'll pos a picture later. all of your costume are 3rd class. :gg: :down

Oh nooo... another stupid child...

Sure... you have a origin suit... did you buy it at Wall Mart? They sold it for only 50.000 US$.

I would like to see someone make a goblin suit.

I would like to see you shut up... :D

Have you ever shown one of your 2nd or 1st class suits?

[reveal]

this is getting ridiculous again...
I really don't want to read dull and immature posts, so Spiderfreak2: go to this site http://www.queendom.com/tests/minitests/fx/immature.html
there is a test that shows you how immature and childish your mind is.

[X-Cloned]

See, get what I mean guys, this forum is going nuts. Spiderfreak2, I admit I'm a 13 year old, but at least I can SPELL properly. I am did not e-mail people. People e-mailed me and I replied a no. German, I agree with you. I'd like to see him shut for a while.
Guys, please join my forum, I have made appropriate moderators so it'll be peaceful. http://spideyreplicas.proboards42.com/

[joemillions]

Ollie you got a PM.

[hanielroswell]

How do you see me or others not trying to stop this. I stop letting my feelings not been known, on the other Han goes and starts off by saying something else. It really looks like Han gets freedom of speech here or your so far up his arse. I mean look at all the posts in Haniels history. Has anyone ever put him in his place.

What you should of said was...( if your on his side)


Yea Joe's right, Haniel make yourself look the better person by not posting that way everyone should stop arguing- - don't make out like it's moir causing all the problems and it has nothing to do with Haniel.

Do the maths.

you right, i do get freedom of speech. after all this is a public forum and every one here is entitle to it. it just that i voice my opinion more then other here on the hype.

look, i really have no idea what the hell you trying to make with your last few sentense but i ain't even going to give you the pleausre of hearing my response. cause you really need to hook-on-phonic.

and i told you before, if you got some thing againest me, please PM me. i dun want to upset any one here. this is a thread on how to make the perfect spidey suit. not for us to argue over our difference.

peace

haniel roswell

[hanielroswell]

Quote:
Originally Posted by bugeyed
Just keep on proving my point partner.





But we're the ones talking crap...seriously i think you guys are c@ck whipped by this guy with his secret source (his DVD). Peace out you all I dont need prove myself to a loser that needs to live on a computer until his F%cked up face gets reconstructed.

And Haniel work on your english you D%mb Fu$k!!

hey, i said it to joe and i will say it to you, if you got a problem with me, take it up with me privately. people here do not wish to hear your trashy opinion here on this hype. and i think you should leave other people out of this conversation. people are not coak whipped by me or any one else. you are in seriously delusional if you think that. my guess is that you just a lonely kid in need to intercourse.

comon kid, i'm a gratudate from the university of new york with a master degree in business admistration and you asking me to work on my english? the only thing that really need to reconstructed around here is you petty attitude.

get a clue dude. better yet, get a life

haniel roswell

[tbx_moto]

Who here has good lens frames that they are willing to sell or trade.

If you need a pattern, I'll trade my pattern for your lens frames.
If you have lens frames but need an actual hard lens and not crappy window tint, then ill trade you lenses for frames.

I got a front spider, a back spider, lenses, pattern.
I need lens frames.
Are you willing to trade?

[hanielroswell]

What Han does is he mixes his critical, retaliatory responses w/ comments that ARE on topic. Furthermore, i think he responds to every post that has something to do w/ him (or that he has an opinion on), regardless if we've moved past it or gone beyond it. That fueles the fire again when he does.

Han when you read this thread, do you read in order, respond, and then go to the next post? If you do i'd encourage you to stop. Change your habit to reading everything all at once... make sure your response won't start anything again, and then respond.
Finally. Anyone on here who has been criticized for being critical/ abrasive, IS GUILTY of it. Primarly because of posts that would be considered personal attacks. I don't think the people involved understand the point that i've been trying to make all along. IT DOES NOT MATTER if someone attacks you personally.

You don't have to respond in retaliation. and the second part of that, YOU DONT HAVE TO ATTACK ANYONE TO BEGIN WITH.

Enough is enough you guys. If you feel like you have been attacked, and want to make a comment on it, be mature and use the PM. Don't involve the rest of the hype.

I don't know how many times this has been said, the guys on here act like little kids, constantly being reprimanded... then going right back to what they were doing. Is it going to take drastic measures on a moderator's part to help you learn that YOU JUST DON'T GO THERE

your comment is mutual and i agree, i do response to every post if it has some thing to do with me. occasionally i let little tidbit slide with out letting it get on my nerve. but if you would go back and see the post that i've made before, you would realise that unless the comment is trashy and rude, i would never retaliate with brute and ignorant. my reputation are build upon the comment made on the hype. i offer printing service to member here and when a rude comment are toward me, it effect my image as a provider to my client. so you must understand why i am the way i am.

but i will take up on your suggestion and lay low on the rude comment. i appreciate your sober comment made toward this little problem. it is non directive and you dun use censor word to make your poitn and for that i am grateful.

peace

haniel roswell

[hanielroswell]

Great suit amazingheroes.

Everyone, let's start over with no grudges etc.
Jawatrader, Hanielroswell, Purp, let bygones be bygones. I got no grudges anymore, its stupid to hold them so anyone whos got a grudge, lets start over. We all need help creating a suit, plus we like giving advice. Plus, we're ruining the forum, I'll admit, I'm responsible for a chunk of it. Start over as of now.

Anyways, after some hard work I think I'm almost there for my pattern. Check it out, all I need is to blend the highlighted muscles with the shading in the background.

http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg
I'm zoomed in at 33.3%, just in case anyones wondering.

i second to that. let by gone be by gone. i hate to hold grudges , especially with a fellow canadian

haniel roswell

[spidyfan43]

tbx I'll trade for the lenses what do they look like.I tried to ad you to my msn but it wouldn't let me for some reason.

[X-Cloned]

No offense and all, I have NEVER claimed to be perfect. I read every single post I make before posting. Read yours for instance. I and Haniel aren't working on a suit together, but he's still a good friend. Both members were friends and they settled it in a CIVILISED manner. I hope you wouldn't bear grudges. Point is, I have never done anything to offend you, if I did, I shall make a PUBLIC apology. I'm sorry if I had ever offended you.
And the spelling for Liar is Liar, not lier.

[X-Cloned]

Well, show us one of your 1st or 2nd class suits, I'd LOVE to see them...

[X-Cloned]

I shall do the posting here. I am not afraid or threatened, why should I fear.

[X-Cloned]

Quote:
Originally Posted by X-Cloned
Quote:
Originally Posted by spiderfreak2
point 1- you did not give it to all the people. And you don't even know who I am so how do you know you didn't promise me one.
point2 wrong most did but some didn't


Fine, at least this proves I have given to people already. Who would be so nice to give patterns huh ? Who would be stupid enough to give patterns huh ? Fine, reveal yourself.


so you just said you are a liar. and i'm not wanting your pattern you need to make it right with the other people you promised. and Maybe I should just past this crap you just wrote on there so everyone can see that you are a liar.

Guys, I'd like your opinion on this, I don't want the Hype to be messed up.

[X-Cloned]

- none -

[X-Cloned]

People can see what I can see. I don't want SHH to turn into a mess.

[X-Cloned]

- none -

[X-Cloned]

- none -

[X-Cloned]

- none -

[X-Cloned]

- none -

[X-Cloned]

- none -

[spidey4fun]

Hey X-Cloned and Spiderfreak2. Perhaps out of respect for the forum you might consider deleting your above comments.

[X-Cloned]

Guys, I am sorry if I offended any you guys here. I greatly apologise for all my offenses. Let bygones be bygones. I agree with TBX and Han on this. I shall now drop the subject and return you guys to your regularly scheduled conversations. ;)

[spidysingapore]

Hi,Does anyone knows what happened to spidyfan43?.He told me in e-mail that will ship my costume in last Saturday.But until now,I still do not receive any reply from him.

Regards,
Spidysingapore

[X-Cloned]

Hi, fellow Singaporean. Welcome !

[hanielroswell]

my point you can't win. all i ask is that you give tbx a pattern.

cool down spiderfreak. this ain't a contest. we are all equal. no body win or lose. now technically as Xeno mention the pattern is still with me. so no use pushing X over the edge. and i really have to lay it down. what is this with the personal attack about secret sources. i know this has been the root of the entire arguement.

just as we are entitle to voice our opinion on the hype, we certainly have the right to say that we have our own secret source. when is that a crime? i dun know about you but i consider it a priviledge and if you too obnoxious to accept the fact, then i pity you.

if X said that he have a secret souce which only choose to share it with a certain few then that's his decision. after all, it does belong to X. when you got have a set of your own pattern, you can choose who not to share it or share with. as far as i'm concern, you just out looking for freebie.

we dun brag about how we have the very best or the most perfect. and some time when we choose not to share it with any one, we have our own reason. ask ollie or ham or any body if there are willing to let you in on their trade secret chances are they would not share it with you. especially when the item is of high value or with profit potential. that doesn't make us a bad person. even with all the rancid tongue yapping and talking trash about me, i still take the time to view the hype and try to help out any one who need it.

there is not one person who pm me seeking assistance which i have turn away from. so give X a break. he only human. if you need the pattern so badly, ebay now are flooded with spiderman pattern similiar to X or ollie which you could purchase now for less then what it was originally sold.

peace

haniel roswell

[hanielroswell]

Hi,Does anyone knows what happened to spidyfan43?.He told me in e-mail that will ship my costume in last Saturday.But until now,I still do not receive any reply from him.

Regards,
Spidysingapore


welcome aboard mate.

give it some time. after all, it does take some time for package to arrive in asia.

haniel roswell

[hanielroswell]

Oh nooo... another stupid child...

Sure... you have a origin suit... did you buy it at Wall Mart? They sold it for only 50.000 US$.



I would like to see you shut up... :D

Have you ever shown one of your 2nd or 1st class suits?

actually, from what i've heard, it's 80,000 ;)

haniel roswell

[hanielroswell]

Come on guys lets all just get along. spiderfreak i made the costume.

hey spideyfan43,

i dun care what that spiderfreak said, that suit look amazing!! i see you made some modification with the addition of the brick pattern. genius. pure genius!! you should give your self a pat on the back my friend. the brick pattern look stunning. keep it up.

haniel roswell

[hanielroswell]

Great suit amazingheroes.

Everyone, let's start over with no grudges etc.
Jawatrader, Hanielroswell, Purp, let bygones be bygones. I got no grudges anymore, its stupid to hold them so anyone whos got a grudge, lets start over. We all need help creating a suit, plus we like giving advice. Plus, we're ruining the forum, I'll admit, I'm responsible for a chunk of it. Start over as of now.

Anyways, after some hard work I think I'm almost there for my pattern. Check it out, all I need is to blend the highlighted muscles with the shading in the background.

http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg
I'm zoomed in at 33.3%, just in case anyones wondering.


i'm impress tbx, at first i thought that was spiderman5 work as it look very similiar. i guess you ain't just all talk after all.

nice job

haniel roswell

[Spiderkes]

People, is there a difference in quatliy for the lycra. I bought me a piece on the market, but am not sure if it's good enough. How can I tell this?

Spiderkes

[X-Cloned]

Hmm, there are indeed thick and thin lycra's. Thick is usually really hot but durable. Thin is nice and comfy but kinda weak.

[Spiderkes]

But the more it stretches the better, isn't it?

[Spiderkes]

The lycra I got now stretches 4 ways, but one way stretches much more than the other. I got a spidyfan suit, and this lycra is the same thing. I need the best lycra there is, so it will really fit tight around your body.

[spidey4fun]

Dudes, I think I may have figured out this brickwork. What do you think. I just need to add a little colour and tidy it up a bit.

http://users.ncable.net.au/~mcdowall/dudes.jpg

No secret source required.......

[joemillions]

Dudes, I think I may have figured out this brickwork. What do you think. I just need to add a little colour and tidy it up a bit.

http://users.ncable.net.au/~mcdowall/dudes.jpg

No secret source required.......

Bravo

[spidey4fun]

And here we go with a bit of colour.....


http://users.ncable.net.au/~mcdowall/test.bmp

[Orlando Spider]

GREAT WORK spidey4fun... looks awesome!

[spidey4fun]

Thanks Orlando, But I only did the brickworks. Xeno's on the colours. A bit a team work does wonders.

[tbx_moto]

Hey spidey4fun, do you think you could help me out with the brick pattern on the blue. Especially on the blue? I need a couple reference pics on the flow on the blue.

spideyfan43, tell me what your msn address is and we'll talk business, but jesus christ, i got AIM to talk to you and you're on and off within 40 seconds all the time, lol.

[joemillions]

I ain't religous but i think out of respect for people who are it would be a good idea to refrain from the use of blasphemy. And do you mean upclose reference pics or what cos there are enough pics going about to give you a good idea.

[spidyfan43]

Hi,Does anyone knows what happened to spidyfan43?.He told me in e-mail that will ship my costume in last Saturday.But until now,I still do not receive any reply from him.

Regards,
Spidysingapore
Sorry I havn't replied to your e-mails I have been very bussy trying to finished your suit and its on it way. thanks

[spidyfan43]

hey spideyfan43,

i dun care what that spiderfreak said, that suit look amazing!! i see you made some modification with the addition of the brick pattern. genius. pure genius!! you should give your self a pat on the back my friend. the brick pattern look stunning. keep it up.

haniel roswell
Thanks haneil. :)

[Spiderkes]

Hey here is my new spidyfan suit I just finished. I was kinda in a rush so finished it in 2 days, with a mannequin. It has a separate mask and a zipper on the grotch, the perfect suit for parties!

http://server3.uploadit.org/files/tsjahh-IMG_3304.jpg
http://server2.uploadit.org/files/tsjahh-IMG_3308.jpg
http://server2.uploadit.org/files/tsjahh-IMG_3303.jpg


Spiderkes

[spidey4fun]

tbx - From what i've seen of your work, your flow is right, your just on the wrong size brick. The perfect bricks are right under your nose. On the last picture YOU posted. Keep at it. You'll get there.

[spidey4fun]

nice job Spiderkes

[tbx_moto]

all i need is a black and white low res pic of ONLY the brick pattern, or a medium res of the blue brick with blue parts, whatevers easier for you people.


spideyfan43, tell me what your msn address is and we'll talk business.
my AIM is sretsaoc4doogloa
my MSN is haha_i_laugh@hotmail.com

[Glsmatt-Spider]

Attention. Someone on ebay known as MotoXXX63 is using my Spiderman Costume Picture for his Ebay Auction. The item number is: 3870903605. Please help me remove his listing. The enlarged picture of the upper body to the face belongs to me. Thank you. -GLSMATT

[tbx_moto]

any of you that think its me, its not

mine is tbx_moto

[spidyfan43]

I ain't religous but i think out of respect for people who are it would be a good idea to refrain from the use of blasphemy. And do you mean upclose reference pics or what cos there are enough pics going about to give you a good idea.

Thanks joe. hey great job on the bricks how did you do that?

[tbx_moto]

I did it by workin hard. Check it out
This is my latest one:
http://24.77.46.187/spiderman/mypattern/powbiatch.jpg
This is my last one:
http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg

i think my new one is way better

[spidyfan43]

spiderhunter the webbing turned out really good.

[spidyfan43]

the new one looks good

[spidey4fun]

TBX - Dude nice graphic job... What photoshop tool did you use to make make the muscles???? No blending required....very cool:D

[hanielroswell]

Dudes, I think I may have figured out this brickwork. What do you think. I just need to add a little colour and tidy it up a bit.

http://users.ncable.net.au/~mcdowall/dudes.jpg

No secret source required.......

nice work. can't wait to see the finish result. by the way, singaporespider is looking for you. you need to PM him or email him or some thing.

haniel roswell

[hanielroswell]

I did it by workin hard. Check it out
This is my latest one:
http://24.77.46.187/spiderman/mypattern/powbiatch.jpg
This is my last one:
http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg

i think my new one is way better

hey, that awesome tbx. especially the first one. the brick pattern tend to bend and swirl naturally with the thigh muscle. very 3 demenional look. i like it.

haniel roswell

[hanielroswell]

Attention. Someone on ebay known as MotoXXX63 is using my Spiderman Costume Picture for his Ebay Auction. The item number is: 3870903605. Please help me remove his listing. The enlarged picture of the upper body to the face belongs to me. Thank you. -GLSMATT

that's too bad man,

may be you should just take this up with ebay personally. after all, your pic were being use. hmmm.... i can't help to think that i've seen the suit before. or if not, the back drop. if any one remmeber some one once place an auction on ebay on a B&B original costume. in one of the pic, he was sitting on a beautiful Ferrari Modena 360. i think it's the same person. just look at the nick he uses on ebay. that kinda give you a clue.

haniel roswell

[hanielroswell]

btw, TBX, have you access how much you would be selling that new pattern of yours? if the price is right, i might be interested to buy one from you.

haniel roswell

[hanielroswell]

Thanks haneil. :)


you most welcome my friend. i'm looking forward to your future project if there is any;)

haniel roswell

[hanielroswell]

Hey here is my new spidyfan suit I just finished. I was kinda in a rush so finished it in 2 days, with a mannequin. It has a separate mask and a zipper on the grotch, the perfect suit for parties!

http://server3.uploadit.org/files/tsjahh-IMG_3304.jpg
http://server2.uploadit.org/files/tsjahh-IMG_3308.jpg
http://server2.uploadit.org/files/tsjahh-IMG_3303.jpg


Spiderkes

hey that looks great,

have i've seen that back spider some where before? i think it was on a purp suit. it look very similiar to his. i really dig the new changes you made to the suit. especially the back spider.

excellent work my friend.

peace

haniel roswell

[hanielroswell]

People, is there a difference in quatliy for the lycra. I bought me a piece on the market, but am not sure if it's good enough. How can I tell this?

Spiderkes

there is in fact difference in in lycra. usually in term of the amount of elastene and polyester. it is crucial that you have the right lycra for the pattern to be printed upon other wise the result could be less then satisfying. i didn't know this until Ben inform me about it.

pending on how the pattern is transfer to the lycra, you would have to access the quality of the fabric use. if you use dye sub, which is a kind of heating process, then lycra with a higher percentage of polyester are require to sustain the extreme heat. other wise, you end up scortching the fabric.

i thank Ben for the kudos on this knowledge which he have instill upon me.

god bless ya

haniel roswell

[Spiderkes]

Hey glsmatt, maybe the guy has a spidyfan suit too. Maybe spidyfan43 knows him??

[Spiderkes]

Ben or Haniel,

How can I tell what lycra is good? I bought a piece, but it doesn't stretch as good as spidyfan43's. In a few weeks I start the dye sub, I need good lycra. Do one of you know how to pick the good from the bad?
Oh and ben, how is the front spider doing? Still want one.
thnx

Spiderkes

[trepamuros]

eyy people how i must fit the weblines in normal position o stretch?

[tbx_moto]

Glsmatt, maybe the reason he has the pictures is because he bought that suit from you and doesnt have a digital camera or a scanner so he just used the pictures that you took. I don't think theres anything wrong with that.

[tbx_moto]

btw, TBX, have you access how much you would be selling that new pattern of yours? if the price is right, i might be interested to buy one from you.

haniel roswell

I'm thinking of selling it for $35 USD.

[tbx_moto]

TBX - Dude nice graphic job... What photoshop tool did you use to make make the muscles???? No blending required....very cool:D

Thanks man, it took me hours of hit and miss with the liquify tool.

[Spiderkes]

eyy people how i must fit the weblines in normal position o stretch?

You should fill the costume and attach the webs when the suit is the same shape as it is when you wear it. Mannequin works best, but you also can fill it with stuff out of a pillow or whatever.

[Nfox]

TBX, I know the feeling...I too am going crazy with liquify. Great job by they way, it is a work of art, and only $35, I applaud you an your skills. I hope to have some example pics from a liquify test by next weekend.

Nick Fox

[tbx_moto]

Ben or Haniel,

How can I tell what lycra is good? I bought a piece, but it doesn't stretch as good as spidyfan43's. In a few weeks I start the dye sub, I need good lycra. Do one of you know how to pick the good from the bad?
Oh and ben, how is the front spider doing? Still want one.
thnx

Spiderkes

The stretch of the fabric will all depend on what size of the image has to be dye sublimated.

Take a piece of spandex or lycra or whatever you like to call it, they're both the same, measure it unstretched and then stretch it as much as possible and take that measurement. Then divide the length UNstretched by the length stretched and you should probably get something around 71%.

take your height, say 6 feet. you have to scale the image in photoshop so that it will print out scaled to 71% of your height. you'll have to figure it out yourself i dont feel like writing an essay.

So my point is, it doesnt matter how stretchy the material is, just as long as the image is scaled properly.

TBX, I know the feeling...I too am going crazy with liquify. Great job by they way, it is a work of art, and only $35, I applaud you an your skills. I hope to have some example pics from a liquify test by next weekend.

Nick Fox Thanks man.

[spidyfan43]

hey that looks great,

have i've seen that back spider some where before? i think it was on a purp suit. it look very similiar to his. i really dig the new changes you made to the suit. especially the back spider.

excellent work my friend.

peace

haniel roswell
thanks han. I made the spider myself its sewn onto the back.

[spidyfan43]

Speaking of SpidyFan43,

Has the Goblin Suit come along any farther?

Hi orlando, its together but I'm still working on attaching the armor and I ordered a helmet from thewrapofcon back in october but I still havn't got it.

[reveal]

Attention. Someone on ebay known as MotoXXX63 is using my Spiderman Costume Picture for his Ebay Auction. The item number is: 3870903605. Please help me remove his listing. The enlarged picture of the upper body to the face belongs to me. Thank you. -GLSMATT
I emailed him and asked, that is he using your pictures, and here's what i got out of him:
"#1) Those are MY pictures
#2) If they are Glsmatt's pictures, show me where he copyrighted them
#3) Get a life man. If you have time to sit around on ebay being pissed about pictures...you need to get laid or something.

And don't try to threaten me or my brother about auctions.
If you mess with my auctions, I can mess with yours as well."

Not a very nice answer to a simple question...I mailed him back that I'm very sorry to bother him, but I just wanted to know the truth.
-reveal-

[jawatrader]

I did it by workin hard. Check it out
This is my latest one:
http://24.77.46.187/spiderman/mypattern/powbiatch.jpg
This is my last one:
http://24.77.46.187/spiderman/mypattern/pattern_leg_etc.jpg

i think my new one is way better
Hey TBX...awsome. I take back every negative thing I said about you. You do indeed have talent with photoshop. Keep up the great work.

[tbx_moto]

Hey TBX...awsome. I take back every negative thing I said about you. You do indeed have talent with photoshop. Keep up the great work.

I also take back everything bad i said about you.

[spiderfan09]

Hey tbx, same here, I am sorry for the stuff I said about you before, no hard feelings. Keep the peace :spidey:

[Spiderkes]

Here are my pictures where I pose myself. This suit will be on ebay in a few days, came out super!


http://server2.uploadit.org/files/tsjahh-sm1.jpg

http://server2.uploadit.org/files/tsjahh-sm2.jpg

http://server2.uploadit.org/files/tsjahh-sm3.jpg

http://server2.uploadit.org/files/tsjahh-sm4.jpg


http://server3.uploadit.org/files/tsjahh-sm5.jpg


http://server2.uploadit.org/files/tsjahh-sm6.jpg

All the honor to spidyfan43.

Spiderkes

[Orlando Spider]

Hey TBX, if i might make a suggestion...

Perhaps where you liquified the groin area of the costume... you might want the effect to look a little less...eh. extreme? In my opinion that area should be ALMOST flat ;)

*edit*....
unless of course you're going for a more, "adult" costume?

point being... it might look alittle funny one a wearer...yeah

[tbx_moto]

lol, I have some original suit pics and it does bulge there, but he also had a jock on.

I'm getting extremely skeptical of price now that my pattern has such good comments.

Have you guys ever heard the saying "One unique penny is worth a million pennies, but a million unique pennies are only worth a penny each"?
I think it applies to my situation.

[Orlando Spider]

Oh i know the origional pattern has the bulge appearance... but i think it was localized to a smaller area?... thus not seeming quite as ..."bulgy"

Does n-e-body else see that?

[Orlando Spider]

HEY i have a fun project (i know it's off topic....)

But take a picture of yourself in your suit *such as here*


http://www.imagestation.com/picture/sraid156/pb2c88461d5cda6fe151e86dbda7dd2cf/f5425766.jpg



and do what i call..... "Comic-ize" it ;)


Such as here.

http://www.imagestation.com/picture/sraid156/p609eb38f51ccc83fb2edd8e123bc7fcb/f5425765.jpg

It's kind of a fun project if you're bored! btw... using a filter in photoshop is cheating ;)

[Orlando Spider]

Ah shoot... the pics got deleted :(

*edit* NM i got it :D

*edit**edit*
SHOOT... imagestation stinks! Here's the album they're in... you'll see what i'm talking about...

http://www.imagestation.com/album/?id=2132424955

[Kuriatey08]

woah, thats really cool, I'll have to try that sometime. It actually looks like a comic picture.

[SpidEMC]

Hey TBX I knew you had it in you, Its great that this board has gotten back to what it is all about, Sharing constructive works of others.
Spiderkes, great looking suit, you pull that look of very stunningly. Hope it gives you a great return for the work that was put into making it.

I also have been busy, I altered the appearance of Knight Seeker's Icon. Here is a gander it is rough til I find someone to make it look much smoother.

http://img.photobucket.com/albums/v341/knightseeker/KnightSeekerCopyrightfront.jpg

Now NEW ICON

http://img.photobucket.com/albums/v341/knightseeker/rawlogoKS2colorsmallerCR.jpg

[X-Cloned]

I have no comment on this.

[SpidEMC]

Do Not Reply To What Was Said. We Finally Have Had A Bit Of Peace Over The Past Few Days. I Say One More Time Do Not Reply To What Was Said Earlier!!!

Do Not Add Fuel To The Spark That Was Just Lit. Let It Go!!!



Hey How About Them Eagles :)

[trepamuros]

thanks spiderkes but ¿where i could find maniqui?

[tbx_moto]

how much money are you people willing to spend on a pattern like mine?
The price has to be over $80.00 USD

[Spiderkes]

Look real good.

thanks spiderkes but ¿where i could find maniqui?

[tbx_moto]

well if that includes it to be printed out onto the lycra then i would definately buy that,not to meantion that your pattern rocks man :up:

Buddy, printing it out onto lycra/spandex costs 5 times what the pattern costs. It costs about $350.00 CAD, $300 USD.

How much would you guys pay if I auctioned it off on ebay and the starting price was $80.00 USD? Just have a pretend bid.

[Orlando Spider]

I'd bid on it TBX...

if it weren't for "the bulge" O.o DuhDuh Daaaah

hehe
no offense... just preference

[jawatrader]

all I see on here is junk:xmen:
junk:unishr:
How do you go about banning a member from the board? I nominate this one for removal. All that agree say " I ".

[SpidEMC]

Thats what I thought. what do you know all you ever talk about is the knight craper!!!!:unishr:

BIG YAWN, HEY TBX I WOULD LOVE THAT PATTERN, but more into KS at this moment, but prehaps later. And I would take the private area shading, but I dont think I need any help in that department, hahahahaa (I know Orlando would get a kick out of that.) Oops we have to keep it clean here :)

[amazingheroes]

How do you go about banning a member from the board? I nominate this one for removal. All that agree say " I ".

I!!! I!!! I I I I I I!!!!!

[Ericza1980]

..i

[tbx_moto]

Is this what you're afraid of Orlando? Huh? Is it?
http://24.77.46.187/spiderman/mypattern/crotch.jpg
jk jk ill make a seperate pattern with a smaller crotch bulge just for you if you're willing to buy it off of me.

Okay as of now lets have a pretend bid. Starting bid of $90

Do I hear $91, 91 91 91 91?

[Orlando Spider]

Is this what you're afraid of Orlando? Huh? Is it?
http://24.77.46.187/spiderman/mypattern/crotch.jpg
jk jk ill make a seperate pattern with a smaller crotch bulge just for you if you're willing to buy it off of me.

Okay as of now lets have a pretend bid. Starting bid of $90

Do I hear $91, 91 91 91 91?

*AAAH!*
*hides*

For serious though... TBX if you could PM me a downsized image of the full pattern?

[X-Cloned]

I I I !!! Hmm, Spiderfreak, can you post pics once you read this post ?

[hanielroswell]

Ben or Haniel,

How can I tell what lycra is good? I bought a piece, but it doesn't stretch as good as spidyfan43's. In a few weeks I start the dye sub, I need good lycra. Do one of you know how to pick the good from the bad?
Oh and ben, how is the front spider doing? Still want one.
thnx

Spiderkes

well you need to have a higher percentage polyester in order to prevent scortch. usually there are 2 type of lycra, lower percentage in polyester but higher percentage in elastane. the stretch on this type of fabric would not do well under extreme heating process.

i would suggest higher polyester percentage over elastane. 92%/8% there would less stretch but it would so well under extreme heating.

i think what you have is correct since you stated that the stretching properties are not as good. you probably have the higher percentage polyester fabric. but it's best to have your printer create a sample for you just in case.

haniel roswell

[hanielroswell]

I'm thinking of selling it for $35 USD.

hey that great, for a master piece like that, sure well worth the price. put me down for one will ya?

thanks.

haniel roswell

[hanielroswell]

Hey TBX...awsome. I take back every negative thing I said about you. You do indeed have talent with photoshop. Keep up the great work.

yeah, if TBX would have shown that to us earlier, our assumption might be a little bit different better late then never i always say. wicked man, wicked.....

haniel roswell

[hanielroswell]

nah,i think hes busy making the perfect spidey suit,has better things to do than hanging on the internet allday posting crap.maybe this will just ''fuel'' the arguement but i dont care,i've had enough of little punk ass newbies coming on here all the time starting flame wars with people actually doing stuff worth while,who the hell are you anyway? just some little postwhore looser with nothing better to do than diss people,well its just getting pathetic,lets see your spider suit then,if you have a good one then i'll buy it from you,then place it on your mothers grave,i owe her enough for her services anyway ;) GOODNIGHT *****!!!!

amen!

haniel roswell

[hanielroswell]

Do Not Reply To What Was Said. We Finally Have Had A Bit Of Peace Over The Past Few Days. I Say One More Time Do Not Reply To What Was Said Earlier!!!

Do Not Add Fuel To The Spark That Was Just Lit. Let It Go!!!



Hey How About Them Eagles :)

yeah, he is obviously trying to start some kind of riot here and need to under go some kinda of anger management. it's ain't worth it. as EMC said, we finally have some peace on the hype. let's not spoil it. btw, nice costume EMC.

haniel roswell

[hanielroswell]

how much money are you people willing to spend on a pattern like mine?
The price has to be over $80.00 USD

although i have to admit that your pattern look very good, but i doubt it would be a good idea to start your auction at 80 buck. may be a several month ago, before the pattern were still a white rhino, unknown and un heard of, yeah, you probably could fetch well over 80 buck. but now you could get the pattern for half that price at ebay and it ain't just one people doing it. it's the whole lot.

not to discredit you in any way, but i would suggest that you offer it at your said price of 35 dollar. i'm sure with the amount of creativity and effort put into your pattern, you might be lucky enough to fetch 50 dollar or even more.

haniel roswell

[hanielroswell]

How do you go about banning a member from the board? I nominate this one for removal. All that agree say " I ".

if only it were that easy. best bet is let him run amuck here and hopefully the moderator are paying attention to this hype. he were ban once for the same reason, my guess it would happen again. just keep your finger cross

haniel roswell

[SpidEMC]

Hey Thanks Haniel, you know me just doing my thing.

Also in about a week from now someone from this board may have a finished drawing of the character. I hope we can post it soon.

Knight Seeker

[hanielroswell]

i will post my costume soon:xmen:


dun say it, bring it. l love to see what you have that you deem every costume here second class. you better have some thing amazing pal to a show for pal.

peace

haniel roswell

[hanielroswell]

damn you cant bribe anyone these days.i think i may get it from ollie,if he's still willing to.

and speaking of ollie, check out his auction at ebay man. it's great. from the look of it, would well worth every penny.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=32991&item=3871541054&rd=1

excellent work my friend

haniel roswell

[spidey4fun]

dun say it, bring it. l love to see what you have that you deem every costume here second class. you better have some thing amazing pal to a show for pal.

peace

haniel roswell
Hey Han, thats a great idea...dont say it show it......I've been waiting for months and months to see some of YOUR work. Your comments have been interesting BUT a picture tells a 1000 words.....

[X-Cloned]

We're on Page 399 !!! We're on to 400 guys !!! :D

[Orlando Spider]

Almost at 10,000 posts too ;)

Yah Han! I'd love to see what you've been up to

[Spiderkes]

here it goes:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=17082&item=6509530682&rd=1

[Spiderkes]

hunter, look for someone you know that can sew. Mother, aunt, grandmother there must be someone..

[tbx_moto]

hunter, look for someone you know that can sew. Mother, aunt, grandmother there must be someone..

Or how about you learn yourself. You can't be charged if you're self employed. It's not that hard of a thing to do, just ask and practice a bit.

[Spiderkes]

true tbx, but the sewing machine is a must. And it's not possible with just any machine, you need the special one that makes seams which can stretch.

[Orlando Spider]

true tbx, but the sewing machine is a must. And it's not possible with just any machine, you need the special one that makes seams which can stretch.

also known as a "Serger" ;)

instead of the conventional sewing machine that uses one thread (and a robbin)
a serger uses from 3 to 5 spools of thread. Another feature that sergers have is an automatic cutting mechanism... that trims off excess materials during the sewing process...

It's best to know what you're doing because it is easier to injure yourself w/ a serger.

However, another method of creating a "stretch stitch" (though not as neat... or reliable as a serger's stitch)....is to

(and this is what i did on my suit)

use the setting on the sewing machine that looks like so...

\/\/\/\/\/\/\/\/\/\
and layer it three times on top each other for durability. ;)
(meaning... stitch-backstitch, then restitch
Using polyester thread is also recommended because it stretches more (and is more durable) than cotton thread.

[tbx_moto]

Spider-hunter ill do it, I need the business, lol. give me an offer.

[Orlando Spider]

Hmm...remember TBX, market your product before you sell it. Give Spider-hunter a visual example of your sewing work, before he sends his suit to you ;)

*just a friendly reminder*

[tbx_moto]

Actually now that I think about it, I'm not going to sell now. Mines about 10x better than anyones on the forum and I have no problem keeping it on my computer only.

[Orlando Spider]

Ya know... it's really not right to say that your adaptation of the pattern is "better"...

rather, it's an adaptation, and it's unique. However you prefer yours over everyone elses... and want to keep it. that's cool ;)

But why not sell it? If you do view it as better others would be bound to too! Be an entrepeneur and make a profit... . c'mon ;) ;) *wink wink* *nudge nudge*

*edit!* 150th post for me! Woo hoo!

[Ericza1980]

Hey guys, does anyone have some accurate measurments of the eyes on the suit?

Thanks,
Eric

[tbx_moto]

I wouldve sold it if anyone showed interest but I don't see any and I offered more than enough times

[tbx_moto]

Hey guys, does anyone have some accurate measurments of the eyes on the suit?

Thanks,
Eric

It depends on your size.

[Ericza1980]

It depends on your size.

So should i just go with what looks best on me?

[tbx_moto]

So should i just go with what looks best on me?

If you're making just a mask then yes. But if you're making a whole suit, then no. I've seen plenty of ****ty suits because first it's one thing they don't do, then it's another thing. And then it leads to a real piece.

So if you're going to make a suit, use dye sublimation and scale it to you, and after you sew it up and put webs on it you should have the exact size for lenses on it

[tbx_moto]

I really

[tbx_moto]

really

[tbx_moto]

seriously

[tbx_moto]

really think

[tbx_moto]

I really really seriously think

[tbx_moto]

seriously think

[tbx_moto]

think that I

[tbx_moto]

I really really seriously really think that I got

[tbx_moto]

Well, actually I'm

[tbx_moto]

actually I'm pretty sure

[tbx_moto]

not so much pretty sure as I am positice

[tbx_moto]

positive*

[tbx_moto]

I really really think Im positive that I'm pretty sure

[tbx_moto]

that I can

[tbx_moto]

have the

[tbx_moto]

best possible

[tbx_moto]

chance

[tbx_moto]

of getting the 10,000th post, now that I own it, lets move on to something else

[tbx_moto]

I also own this one

[Orlando Spider]

I don't normally usually use explitives but.....
you B*ST*RD! I wanted 10,000 :(

*cries*

actually out of all the curse words i think that one is the funniest ^.^ :p

is that a bad thing?

*edit* well i guess 10,002 is cool enough /: |

[Germanspider]

of getting the 10,000th post, now that I own it, lets move on to something else

And that´s what i would call SPAM or FLAMING...

BTW: You wonder, why nobody´s interested in your webbing? May be it´s because, nobody have ever seen it...

[Orlando Spider]

And that´s what i would call SPAM or FLAMING...

BTW: You wonder, why nobody´s interested in your webbing? May be it´s because, nobody have ever seen it...

yeah... there was a little spammage involved there... but i don't consider it a big deal ...there was motive :p

and actually, erm. I think we've moved past the webbing issue?

[Spiderkes]

tbx, I haven't seen enough of your pattern to surely know what quality it has. I only saw a piece, everyone can do a piece. And keep the posts on topic plz, the level of the boards is decreasing. Could you pm me with a small pic of your whole pattern?

Spiderkes

[X-Cloned]

Happy 400th page and 10,000th post !!!

[Roc74]

Hello Everyone, All you guys building suits are doing a wonderful job. I really seen an evolution between the first suits that came out to the ones being built now. You guys never seem to amaze me when close the gap between a Big Budgeted Hollywood created costume, and your own custom suits. Keep up the good work

[tbx_moto]

And that´s what i would call SPAM or FLAMING...

BTW: You wonder, why nobody´s interested in your webbing? May be it´s because, nobody have ever seen it...

Sounds like I struck a nerve with this 10,000th post thing with you. Actually my webbing is going to be just as good as Ollies as I have recently bought a router bit that is the exact same as they did in the movie. Plus I also have a computerized milling machine at school. So I'll be getting the negative molds for free and then I'll be selling webs left and right. Which will eventually give me enough money to do dye sublimation. So not only did I gain a ****load of money, I was also more efficient than anybody. And you know what? Ollie is a great guy on here and I figure after mines done, me and him will have the best suits on here.

[Roc74]

Hello Can anyone recommend a place in the US where they do this printing on the Lycra, Dye Sublimantion I think its called? Thanks

[Roc74]

Hello Again, Has anyone here ever explore the idea of creating or commissioning a statue to display your suit like the One Mike Hill created for Ben and Bobby's suit? I wonder how much something like that would cost, or who could you even find to do it? I believe the one Mike hill did was casted in Fiberglass, so it's somewhat light and durable. I also wonder if this statue/mannequin breaks a part to fit the costume better.

[tbx_moto]

Hello Can anyone recommend a place in the US where they do this printing on the Lycra, Dye Sublimantion I think its called? Thanks

Check the yellow pages under "screen printing" and ask if they know people that do dye sublimation. Or check under "printers" or "printing".

[Germanspider]

...Ollie is a great guy on here and I figure after mines done, me and him will have the best suits on here.

That´s what i mean... i don´t like people alway telling "mine is the best"... everyone who makes his own suit will love his suit.
That´s what this thread was about a long time ago. It never depends on the quality... it was the family feeling in this thread. Every suit was great... because everybody knew how much work and time you have to spend on it.

For example:
http://www.spider-costumes.de/db_peter013.jpg
Nothing to do with the movie suit... but it´s great... you know why? It´s his own work. He never copied work from others. He had his own ideas.
Sure... this thread is for everybody who needs a inspiration... but not for copy work.
I know... my next suit will NOT be a movie suit... the next one will be a Ben Reilly style... it will be perfect... because there is nothing to compare with.
And YOU can nothing say against it. Because the thread ist NOT "Making the perfect Spidey movie suit"

And please... stop telling us every day how amazing and perfect your work WILL be... show us your suit...

[joemillions]

Right on it German!

[tbx_moto]

That´s what i mean... i don´t like people alway telling "mine is the best"... everyone who makes his own suit will love his suit.
That´s what this thread was about a long time ago. It never depends on the quality... it was the family feeling in this thread. Every suit was great... because everybody knew how much work and time you have to spend on it.

For example:
http://www.spider-costumes.de/db_peter013.jpg
Nothing to do with the movie suit... but it´s great... you know why? It´s his own work. He never copied work from others. He had his own ideas.
Sure... this thread is for everybody who needs a inspiration... but not for copy work.
I know... my next suit will NOT be a movie suit... the next one will be a Ben Reilly style... it will be perfect... because there is nothing to compare with.
And YOU can nothing say against it. Because the thread ist NOT "Making the perfect Spidey movie suit"

And please... stop telling us every day how amazing and perfect your work WILL be... show us your suit...

First of all that kids an idiot and second of all I only said my webbing was great once. That conversation didn't last that long. And my pattern, everyone else said it was great before I did. The reason I think my pattern IS better than most of everyones except Xenos, because he has the original, is because people have PMd me saying so. Jawa asking to trade spidyfan43 saying one thing and when I try to reply hes gone, spiderman5 has been real helpful, Orlando congratulating me. Nfox congratulating me, etc.
Thats what has made me think that. And I never say things everyday about how mine is better or the best. I said it twice. So quit exaggerating. Besides why are you being such a jerk lately?

[Orlando Spider]

Careful TBX, watch your tone.

You too German.

I will however admit that i agree with German about the suits. Every work of art is unique for the individual... it's just not right to say what they did was bad. Comparitevly is it the highest quality compared to "let's say" a movie suit? No... but they put there blood and sweat into it...and it's theirs. You can't take that away from them..only encourage them.

TBX, would you call that kid an idiot to his face? What if you had seen him working on that... pouring his heart out (as much as a 10 yr old can[i'd guess]) into the work on it. To him... when he completed that outfit i bet he felt like a million bucks. But if you said that...What would that do to his confidence? what would that do to his dream? What matters is he had the passion, and the heart to work hard on it. Does that mean he has a future in movie prop production? probably not... But it's his personal best.

Now in your case... take a reality check TBX. Though you have a great pattern here... and people approve that it would work on a suit, you should not be claiming it is the "best" suit. Because... frankly it certainly is not. As far as quality standards go, i'd consider spiderman5's "thebest" thus far (as i've seen)...pm me and i could go into why. But TBX i certainly think that we need to take a step off the pedistal now, and realize that though you DO have a good pattern, you can CERTAINLY improve on it....as it is not "better than anyone else's on here".

I hope i don't offend you with this... it's just when people begin to get a taste of the spotlight, and lose humbleness (and think they're the best), that's when it's time to realize that they need to take a step back... and continue to contribute. not gloat.
The reason i'm posting this on here..btw, and not in pm is because i think i have a valid point that everyone should take note of.
and TBX, i know you only said it twice... but you still said it.

"all it takes is one"

[SpidEMC]

No truer words have ever been said. Thanks for posting that Orlando I was about to say something to that effect as well.

People lets move on!!

[Spiderkes]

I say anyone can corret a pattern. Who has the best suit here? I don't know. But to prove yourself show us a complete suit. So far only B&B and Ollie has proven theirselves to be great costumemakers. And then I am talking about the suit that is the most movie accurate. These people I think are the only ones who can have any demand about what their suits are worth and what they want for it. They have come this far to say their work is good, real good. And what's so strange is that you never hear these people showing off about their work. They just keep quiet and help anyone on the forum they can. Why is it that those who try to be the best always must claim they are the best?
To those that did not prove theirselfes, show us what you can do.

This post isn't directed to ANYONE. It's just giving my opinion in general and I am giving my respect to B&B and Ollie. I am not insulting a single soul here.
Hate long posts, but couldn't help it.
As Han would say,
Peace


Spiderkes

[Spiderkes]

I am a bit drunk now, so I'll quit. I just had a party where I wore my spidyfan suit, everybody loved it. Even the police came chatting with me and the taxi driver, who brought me home, said all the cabs were talking about me by intercom. It only is a bit annoying to keep all the people away that want to wear you mask...
Sleep well.

Spiderkes

[Orcinus]

Hello true believers.

Just wanting to ask this: What is the best way to fix silicon webbing to the costume's lycra? :S I have problems on this issue.

Thanks!! :)

[Roc74]

Check the yellow pages under "screen printing" and ask if they know people that do dye sublimation. Or check under "printers" or "printing".

Thanks TBX, I'll give this a try... Was wondering if there was someplace ppl have gone before so I know at least they have done this work before...

[Orlando Spider]

I've heard that simple superglue works great :)
But i've never used the method... so i'd wait for someone else's experienced opinion

[hanielroswell]

Hey Han, thats a great idea...dont say it show it......I've been waiting for months and months to see some of YOUR work. Your comments have been interesting BUT a picture tells a 1000 words.....

i appreciate your patient and i have to admit that it has been a while. i'm not much for empty promises and i am a man of my word.

at the moment, i've made a sample from the pattern which i've obtain from my soucre and the result are very satisfiying. the colour and texture are just right.

now all i need is to find a digi cam to take some picture of the finish product. i haven't found any one with a digi cam yet. so i'm still looking for one. i will soon return this sample back to my source. so i would need to find a cam fast.

but i promise that i will dsiplay my creation to you all.

haniel roswell

[hanielroswell]

And that´s what i would call SPAM or FLAMING...

BTW: You wonder, why nobody´s interested in your webbing? May be it´s because, nobody have ever seen it...

i hate to say it but he got you there TBX. but i think there is mis understanding. i think tbx were refering to the pattern . and not the webbing. although i would like to see tbx version of the webbing.

10x better then any one here? hmmm.. that is still a cause for debate.

haniel roswell

[hanielroswell]

tbx, I haven't seen enough of your pattern to surely know what quality it has. I only saw a piece, everyone can do a piece. And keep the posts on topic plz, the level of the boards is decreasing. Could you pm me with a small pic of your whole pattern?

Spiderkes

i agree,

thus far, we like what we see. obviously you have a talent and we can see that from that one pattern . but i think you could arouse more interest if you could show us a little bit more then that. namely, the oblique, back and arm.

haniel roswell

[hanielroswell]

Sounds like I struck a nerve with this 10,000th post thing with you. Actually my webbing is going to be just as good as Ollies as I have recently bought a router bit that is the exact same as they did in the movie. Plus I also have a computerized milling machine at school. So I'll be getting the negative molds for free and then I'll be selling webs left and right. Which will eventually give me enough money to do dye sublimation. So not only did I gain a ****load of money, I was also more efficient than anybody. And you know what? Ollie is a great guy on here and I figure after mines done, me and him will have the best suits on here.


again, that is still a matter of opinion.

peace

haniel roswell

[hanielroswell]

That´s what i mean... i don´t like people alway telling "mine is the best"... everyone who makes his own suit will love his suit.
That´s what this thread was about a long time ago. It never depends on the quality... it was the family feeling in this thread. Every suit was great... because everybody knew how much work and time you have to spend on it.

For example:
http://www.spider-costumes.de/db_peter013.jpg
Nothing to do with the movie suit... but it´s great... you know why? It´s his own work. He never copied work from others. He had his own ideas.
Sure... this thread is for everybody who needs a inspiration... but not for copy work.
I know... my next suit will NOT be a movie suit... the next one will be a Ben Reilly style... it will be perfect... because there is nothing to compare with.
And YOU can nothing say against it. Because the thread ist NOT "Making the perfect Spidey movie suit"

And please... stop telling us every day how amazing and perfect your work WILL be... show us your suit...


amen to that,

at the martial art school that i attend, there is a small sign at entrance at my dojo, it read, " please leave your ego at the door step " and i think this law should be applied to every one whom decided to be part of the hype.

sure, who doesn't think that their suit are very best or that it is better then the other. no harm thinking about it. but best keep your opinion to your self. or at my dojo, at the door step.

this is not a competition to see who could make the best suit of have the best looking pattern. this is a place for sharing and exchanging knowledge. with one another. we are all brother of the same cause. we family, let's act like one shall we. no more ego. we are all god children and we are all create equal. no one is better then some body.


peace

haniel roswell

[X-Cloned]

TBX, I hate to tell you this, but the originals weren't made using a router bit and a CNC mill. It was made with a laser cutting machine for the precision that was intended and to make sure that there were no machine marks. Same with the mold of the back spider. But making a mold out of a CNC mill would be good. But you gotta clean machine marks after they are done. Especially if you're making metal molds. Routers don't tend to turn up really well. I tried before.



Sounds like I struck a nerve with this 10,000th post thing with you. Actually my webbing is going to be just as good as Ollies as I have recently bought a router bit that is the exact same as they did in the movie. Plus I also have a computerized milling machine at school. So I'll be getting the negative molds for free and then I'll be selling webs left and right. Which will eventually give me enough money to do dye sublimation. So not only did I gain a ****load of money, I was also more efficient than anybody. And you know what? Ollie is a great guy on here and I figure after mines done, me and him will have the best suits on here.