The SuperHeroHype Forums

The SuperHeroHype Forums (http://forums.superherohype.com/index.php)
-   Captain America World (http://forums.superherohype.com/forumdisplay.php?f=442)
-   -   Captain America First Avenger Heater Shield Build (http://forums.superherohype.com/showthread.php?t=392297)

Spamtron 08-24-2012 12:39 PM

Captain America First Avenger Heater Shield Build
 
Decided to do my own custom shield to replaced the too large Licensed Shield I started with, went with the cheap ebay knight shield for the start after checking the size was what I needed for accuracy.
used a cutter wheel to trim the top edge for better shape, stripped the lion and paint, then spec'd out the correct size of the stars, stripes, and blue section. Used an old Indy bag strap and cut the end of a shovel handle for the grip.

https://lh3.googleusercontent.com/-R...2013.29.24.jpg

https://lh3.googleusercontent.com/-2...2010.28.11.jpg

https://lh3.googleusercontent.com/-5...2011.55.20.jpg

https://lh4.googleusercontent.com/-4...2000.48.18.jpg

https://lh3.googleusercontent.com/-g...2013.52.42.jpg

https://lh5.googleusercontent.com/-n...2014.46.34.jpg

https://lh4.googleusercontent.com/-Y...2019.30.06.jpg

https://lh4.googleusercontent.com/-C...2019.32.05.jpg


All times are GMT -5. The time now is 11:13 AM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SuperHeroHype.com, A property of CraveOnline, a divison of AtomicOnline, LLC © 2009 CraveOnline Media, LLC. All Rights Reserved.