View Single Post
Old 04-17-2013, 10:03 AM   #932
Wadaltmon
S.P.I.D.E.R.-Man
 
Wadaltmon's Avatar
 
Join Date: Sep 2011
Posts: 908
Default Re: Web shooter shop class - Part 2

Alright, my friend. See you later. Just remember to come back!

NextGenHero: Here is the list that I made of the materials. It is just in a .txt file, so I apologize for any formatting issues here.

tank: $9.99 at Home Depot (http://www.homedepot.com/p/t/1001884...5#.UT30QxzqmSo)
trigger: $3.99 at Radio Shack (http://www.radioshack.com/product/in...=under+%243.99)
wires: $9.49 at Radio Shack (http://www.radioshack.com/product/in...Value=22+gauge)
ATMega168 Microcontroller: $14.99 at Nerdkits (http://www.nerdkits.com/store/)
PCB: $2.49 at Radio Shack (http://www.radioshack.com/product/in...tent=CT2032230)
2 x CR2032 Holders: $1.19 each at Radio Shack (http://www.radioshack.com/product/in...ductId=3060977)
Relay: $3.35 at Radio Shack (http://www.radioshack.com/product/in...odsInSession=1)
Solenoid Valve: $12 on eBay
9V Battery Snap connectors: $2.69 at Radio Shack (http://www.radioshack.com/product/in...ductId=2062218)
Nozzle: $4.99 at Ace Hardware
Spinneret (not necessary): Got it out of a soap dispenser that was broken (http://www.target.com/p/lysol-health...ysol+dispenser)
Case: Use anything made of plastic that you have lying around that can hold it
Solenoid Mounting hardware: Just use screws you have lying around that fit it
Batteries: Just use ones you have, or go out an buy them for less than $10 total

Total cost: $65.25, tax not included

Wadaltmon is offline