The Official Bane Costume Thread - Part 1

[Cody2575]

Originally Posted by Roids

No probs man end of next week should be able to give u answer

Thank roids
I do have one question i have a 24" head do you know what size i would need thanks

[Roids]

No idea man

[B4tman]

Originally Posted by Cody2575

Thank roids
I do have one question i have a 24" head do you know what size i would need thanks

You would be a large, but it large might not even fit depending on your second measurement. I'm guessing 24" is your horizontal circumference measurements which equal to 60.96 cm. the large mask according to roids is Between 56-57 give or take around your forehead

[Kiyashi]

Originally Posted by Roids

No probs man end of next week should be able to give u answer

How is this going to work? Like you'll email us for ordering one or PM us or? lol your PM is hella full atm so can't send you any messages. Sent you anemail though so you have mine from the squall34 one. Also can you let us know how to measure our heads to know which one would be a better fit? Thanks btw Riods

[Cody2575]

Originally Posted by B4tman

You would be a large, but it large might not even fit depending on your second measurement. I'm guessing 24" is your horizontal circumference measurements which equal to 60.96 cm. the large mask according to roids is Between 56-57 give or take around your forehead

Man i hope not

[B4tman]

Originally Posted by Cody2575

Man i hope not

I know me too I also measured 24 inches around my forehead but I went with the large anyway .. I figured I few cm wouldn't make much of a difference I hope

[jonnywhc]

Originally Posted by Cody2575

Thank roids
I do have one question i have a 24" head do you know what size i would need thanks

Originally Posted by Roids

No idea man

I don't know why I found this so funny lol.

[Trust me]

hey yall, thought id post a couple of quick pre-painted snaps of my new JBrown mask. Hopefully have it painted in a week or two.

Many thanks to JBrown!!! Cheers mate!!!

[Rdmaul]

Trust Me, you will be very happy with your JBrown mask. I know I am

[Kiyashi]

Who's JBrown? lol is there pics of his finished masks?

[jonnywhc]

Look at the pics I posted, then look below and he comments on them.

[Rdmaul]

JBrown437 is the seller of this mask, I love mine. Fits snug to my head, and is cast in urethane

[Kiyashi]

Originally Posted by Rdmaul

JBrown437 is the seller of this mask, I love mine. Fits snug to my head, and is cast in urethane

Oh dang did he do the painting? Did a pretty good job on the painting. I like how it fits snug too how it's supposed to be. Is he selling still? How much was it?

[jonnywhc]

Interesting how you went with one tone and I went with another, both are awesome in different ways imo!

[B4tman]

Originally Posted by Rdmaul

JBrown437 is the seller of this mask, I love mine. Fits snug to my head, and is cast in urethane

What are your head measurements RDMAul

[JRO555]

Originally Posted by Rdmaul

Trust Me, you will be very happy with your JBrown mask. I know I am

I have JBrown mask as well, it's amazing! Quick question Rdmaul, how did you give your mask the rusty look?

[Cody2575]

Originally Posted by B4tman

I know me too I also measured 24 inches around my forehead but I went with the large anyway .. I figured I few cm wouldn't make much of a difference I hope

When your mask arrives will you pm me how the mask fits thanks

[B4tman]

Originally Posted by Cody2575

When your mask arrives will you pm me how the mask fits thanks

Yes I will Keep in mind that you have to measure around the top of your head and your jaw

[Cody2575]

Originally Posted by B4tman

Yes I will Keep in mind that you have to measure around the top of your head and your jaw

Ok thanks

[Darkseid1]

wow, just like the joker costumes from 4 years ago, they Hype has some of the most hardcore detailers going. I have to say though, and Im just giving an honest opinion, as nice as some of the costumes are on here, i.e Bane pants and vest, the masks seem to be very lacking. The paint jobs on these look very poor. its taking away from the rest of the suit.

[Roids]

Originally Posted by Darkseid1

wow, just like the joker costumes from 4 years ago, they Hype has some of the most hardcore detailers going. I have to say though, and Im just giving an honest opinion, as nice as some of the costumes are on here, i.e Bane pants and vest, the masks seem to be very lacking. The paint jobs on these look very poor. its taking away from the rest of the suit.

Some paint jobs may very from the films bane but everyone does the mask as they see it different light plays a big part I like this look myself

[ShaneHelms]

Awesome photo Roids. All three of you look top notch.

[bane 719]

Roids did you change your vest at all looks different

[Roids]

Originally Posted by bane 719

Roids did you change your vest at all looks different

Yer bud it's only to get me throu the 2 cons then gonna do the straps like banes ones do you think the vest looks ok anyway?

[bane 719]

Originally Posted by Roids

Yer bud it's only to get me throu the 2 cons then gonna do the straps like banes ones do you think the vest looks ok anyway?

Yeah do you have more pics of the vest....I was only able to tell cause of the straps....also....you think you'll have the masks ready for shipping next week....really excited to get mine.