The Technology Thread - Part 1

Gmail Officially Adds Undo Send, Turn It On Right Now

1309995504349511715.jpg


Do you ever wish that there was an undo button for email? Gmail has offered this experimental feature for some time now. Six years, in fact. But today it’s officially a regular part of Gmail.

No more accidentally sending that killer turkey burger recipe to your boss when it was intended for your aunt. How embarrassing! Was your strongly worded email to the neighborhood association about Mr. Vanlandingham’s obnoxious mailbox colors a bit too strongly worded? Just click undo and delete all those what the fudges and holy shoots. Problem solved!

So how do you enable Gmail’s undo feature? Go to the little cog icon in the upper righthand corner and select “Settings.” About a third of the way down the page you’ll see the “Undo Send” section. You can choose between 5, 10, 20 and 30 second windows of unsendability. Make sure you hit “Save Changes” at the bottom and you’re all set.

Then, the next time you hit send on an email that you probably shouldn’t have, you’ve got precisely that many seconds to change your mind and hit the undo button at the top of the page. Decide after 31 seconds that maybe you shouldn’t call your sister’s new boyfriend a dull, crap-breathing knobhead for spilling his entire Zima over your head at last weekend’s barbecue? Well, you’re out of luck in that case, friend. Technology can’t solve all your problems.

http://gizmodo.com/gmail-officially-adds-undo-send-turn-it-on-right-now-1713353235

30 seconds isn't really a lot of time to think about it. Seems more like a delay in sending it than an actual undo button
 
Engineers Just Broke the Capacity Limit For Fiber Optic Transmission

1316400456759434854.jpg


So, that Internet apocalypse that’s going to befall us when our fiber optic cables max out? Maybe not so much. On Thursday, engineers reported in Science that they’d broken the “capacity limit” for fiber optic transmission, opening the door to future networks that carry more data further at lower costs.

As the world’s collective Internet demand continues to skyrocket, electrical engineers have been keeping pace by upping the signal that passes through our fiber optic cables, allowing us to send and receive more juicy data faster. But optical fiber transmission has certain physical limitations. If you boost the power too much, the beams of laser light that carry data start interfering with one another, until eventually, the signal degrades and information is lost.

Whispers of a so-called capacity crunch—a singular moment when the cables simply can’t spit out our cat videos any faster—have taken on a louder, more alarmist tone recently. Some experts have gone so far as to suggest the Day of Reckoning might be upon us in as little as five years.

Which is why the recent breakthrough is so timely. In experiments performed at UC San Diego’s Qualcomm Institute, electrical engineers were able to increase the power of optical signals nearly 20 fold, deciphering information after it had travelled a record-breaking 7,400 miles, without the use of costly electronic regenerators.

In optical fibers, information is transmitted via carriers that operate across a range of different frequencies. As we beam more laser light through our cables faster, the amount of “crosstalk,” or interference, between these carriers goes up. (Imagine a person shouting down a long corridor, his voice echoing and distorting with increasing distance. Similar idea.) Eventually, we reach a point where the signal becomes so distorted that it can’t be decoded at the other end.

To break that distortion-induced capacity limit, the researchers developed wideband “frequency combs” that essentially condition streams of information before they’re sent out, such that any interference that occurs along the way is predictable. At the receiving end of the fiber, the information can unscrambled and fully restored.

Said Nikola Alic of the Qualcomm Institute, a lead author on the new Science paper:

Today’s fiber optic systems are a little like quicksand. With quicksand, the more you struggle, the faster you sink. With fiber optics, after a certain point, the more power you add to the signal, the more distortion you get, in effect preventing a longer reach. Our approach removes this power limit, which in turn extends how far signals can travel in optical fiber without needing a repeater.​

There’s a lot more work to be done before this development translates into real world Internet improvements, but it’s a promising step toward a future where optical networks carry our data faster and at significantly lower costs than today. Once again, clever engineers are showing the world that most limits are actually in our imaginations. Meanwhile, the Internet lives on.

http://ucsdnews.ucsd.edu/pressrelea...er_and_distance_barriers_for_fiber_optic_comm

Fantastic news
 
Hooray! Now the companies can charge even more for 'increased service'. :o
 
Well hopefully more municipalities will be able to offer services and more options will be available by the time this is rolled out and needed which would hopefully mean more savings for consumers.
 
You never worked for a telecommunications company. :o They like to talk about 'increased speeds' and 'greater performance' while boosting prices and giving short term discounts long term contracts.
 
You Can Feel These Plasma Holograms Made With Femtosecond Lasers

1321821388401370539.gif


With each passing year, engineers are getting closer to recreating the 3D interface technology that pop culture has rendered so clearly for decades.

Just last fall, a Japanese company called Burton Inc. unveiled a system that used lasers to create 3D displays in mid-air which, Burton said, could be used to notify people of emergencies. Now we’re seeing the evolution of that technology—but it’s definitely not being used to warn anyone of impending disasters. It’s being used as UI.

A paper submitted to SIGGRAPH—short for the Special Interest Group on Graphics and Interactive Techniques, which takes place in LA at the end of the summer—details how a group of researchers at the Digital Nature Group at University of Tsukuba managed to create small-scale holograms that are actually haptic and interactive—meaning you can feel them when you touch them.

1321821388564778923.png


The team calls these holograms “Fairy Lights,” but the technology they used is definitely less whimsical. The project uses a femtosecond laser—that is, a laser that emits pulses at super-fast, super-intense paces (for the record, a femtosecond is just 1/1,000,000,000,000,000 of a normal, eternity-spanning second). The pulses “excite” matter to create “voxels” of light, formed to draw 3D holograms at a resolution of “4,000 and 200,000 dots per second,” the authors explain.

[YT]AoWi10YVmfE[/YT]

Why does laser speed matter? Because the faster the laser, the safer for humans to touch. While a slower laser might even burn you, a femtosecond laser is firing so quickly that there’s less opportunity for it to hurt, as IEEE explains. But part of what makes Fairy Lights so interesting isn’t just that they’re safer. It’s that you can still feel them. “Shock waves are generated by plasma when a user touches the plasma voxels,” the authors write. “The user feels an impulse on the finger as if the light has physical substance.”

In other words, this is a new kind of haptic interface. One where the sensation on your skin isn’t cased by a linear actuator, like the Apple Watch uses, but rather the waves that are generated when you interact with plasma in mid-air.

http://gizmodo.com/you-can-feel-these-plasma-holograms-made-with-femtoseco-1715036802

That is awesome!
 
IBm announces new chip that is 7 nanometers and has 20 billion switches.
 
Gmail Now Uses Artificial Neural Networks to Sniff Out Spam

1334236217739701648.jpg


Gmail’s spam filters have always been pretty good, but now they’re getting a shot in the arm. Google’s rolling out its artificial neural network technology, currently used in the likes of its Search and Now apps, to help reduce the weight of unwanted email even further.

The filters that Google has used in the past have been based around rules written by engineers, but now they’ll be able to learn for themselves. Using information garnered from your clicking of “Report spam” and “Not spam” buttons, the networks will help learn themselves what constitutes spam and what doesn’t. In a blog post, Google explains that the new feature will “detect and block the especially sneaky spam.”

The AI will also learn about your individual preferences, too. “While your neighbor may love weekly email newsletters, you may loathe them,” writes Google. “The spam filter can now reflect these individual preferences.” Finally, the filters will also be able to do a better job of spotting impersonation — the kind used for phishing attacks — to ensure you’re only shown genuine email. All of which means your Gmail inbox should be a little clearer from now on.

http://gizmodo.com/gmail-now-uses-artificial-neural-networks-to-sniff-out-1716975952

Pretty sophisticated stuff for email. Maybe now I won't have to guard my gmail account so much and can stop giving out my old AOL email if I think something is not quite on the up and up haha
 
A New 3D Printing Support Filament Easily Dissolves Away in Water

1340405734760827536.gif


When 3D printing a particularly complex object, you often need to incorporate additional support structures into its design, given how the layer by layer additive process works. And with 3D systems new water soluble filament, those unwanted support structures can easily be dissolved away with a little H2O.

Removing support structures usually involves some very careful work with a hobby knife to ensure that the plastic parts you want to remain don’t break off too. The more intricate an object you’re 3D printing, the more nightmarish that process can be. There are already special support filaments that can be dissolved away using a chemical bath, but 3D Systems new Infinity filament dissolves away using regular old tap water.

[YT]S23vULrlbxE[/YT]

Once dissolved the non-toxic filament is apparently safe to just flush down the drain, but larger pieces can be manually removed and discarded in the trash once slightly softened. Because it’s designed to be non-permanent, the material doesn’t have any coloring which could make it difficult to ensure it’s completely removed if the rest of your 3D-printed object is the same shade. But a long soak should ensure every last bit disappears.

Designed for use with 3D Systems’ Cube 3D printers, the new filament is available in $49 or $99 cartridges depending on the size of the machine you’re using it with. And it’s got a shelf-life of about a year, but we all know even 3D printer cartridges need replacing far more frequently than that.

http://gizmodo.com/a-new-3d-printing-support-filament-easily-dissolves-awa-1717688742

3D printing is poised to change the world. It will happen sooner than most think
 
We Can Now See Stunning Real-Time 4D Images of the Heart

1340375371545099368.gif


X-rays, the technology that allows us to peer inside the human body in real-time, can only be used for limited durations for safety reasons. So GE has developed new software that instead relies on ultrasound, which is safe for even fetuses, to generate real-time 3D views of our internal organs.

Ultrasound technology is not unlike the SONAR that submarines use to see under water. An emitter blasts high-frequency inaudible sound waves into the body, and a computer listens for the echoes and generates images of obstacles in the way—which turn out to be our internal organs. But traditional cardiac ultrasound machines used a technique called beamforming that only images the heart in slices, requiring doctors to visualize a complete model in their minds, which can make it difficult to spot areas of concern.

[YT]EpKg17YvMcs[/YT]

To improve a cardiac ultrasound machine’s capabilities, engineers at GE developed a new piece of software called cSound that allows the hardware to work in a completely different way. It intelligently processes all of the data being returned by an ultrasound signal, and uses that information to generate real-time views of organs in 3D. The software can analyze a DVD’s worth of data—just shy of five gigabytes—every second, allowing it to decide what data needs to be kept, and which discarded, to produce stunning real-time images of what’s going on inside us.

1340375372255466088.gif


The new approach to cardiac imaging sounds very similar to the 4D ultrasound machines that many hospitals now advertise as a way to see a baby before it’s born. And it is, but with some key differences in the image processing algorithms. Parents want to see the smooth surface of their unborn child’s skin, because it’s easier for them to understand what they’re looking at having not been trained in interpreting medical images. But doctors are more concerned with being able to see minute differences in heart tissue, so the cSound software does that by instead shading the 3D models so those differing areas stand out by color.

According to doctors, the new 4D cardiovascular ultrasound machines produces images so detailed that they can actually see how blood flow is affected by clots inside arteries, or how much blood is leaking around a valve that’s malfunctioning. And because there’s no radiation involved, there’s no limit to how long the machine can be used on a patient, or how frequently their internal organs can be imaged in 4D.

http://gizmodo.com/we-can-now-see-stunning-real-time-4d-images-of-the-hear-1717714886

This should change the game in cardiac cases
 
Firefox has taken the lead to disable Flash by default in its latest browser after yet another critical security flaw was discovered in Flash. They promise to renable it once Flash gets its **** together (so don't expect Flash to be enabled again, ever).
 
Brilliant Hands-Free Wheelchair Balances On Two Wheels Like a Segway

1341731507567052580.gif


The first time New Zealand inventor Kevin Halsall stepped on a Segway, he saw the potential of using the technology to build a wheelchair that could be controlled without a joystick or requiring the rider to use their hands at all. So he bought one, stripped it down, and turned it into the Ogo.

Because the Ogo wheelchair started off as a $14,000 Segway, it’s the only prototype in existence. But Halsall has been able to refine its design to the point where he’s confident that with a few more small tweaks, it’s ready to be commercialized.

1341731507731364388.jpg


The Segway is controlled by the rider leaning forwards and back while steering with a pair of handlebars in hand. But the Ogo requires a little more finesse, and Halsall has tweaked the electronics to be more responsive to movements from the rider’s core muscles. Leaning forward and back still propels it in those same directions, but side-to-side movements are also now taken into account for steering.

There’s no word on how much the Ogo could cost, but it’s assumed that every single unit will start with an actual Segway so the price tag will be even more than those self-balancing toys. But with an average range of around 18 miles on a single charge, it could be used all day long giving those who rely on a wheelchair a considerable boost in mobility and freedom.

http://gizmodo.com/brilliant-hands-free-wheelchair-balances-on-two-wheels-1717948778

Pretty awesome, maybe with time or some kind of deal with the Segway folks prices could come down to make it more affordable for people who need them
 

Users who are viewing this thread

Back
Top
monitoring_string = "afb8e5d7348ab9e99f73cba908f10802"