DAVIDYR1
Official Licensee
- Joined
- Mar 5, 2002
- Messages
- 1,547
- Reaction score
- 0
- Points
- 31
Seeing as this was made for someone, and fit to their body size I'll wait for him to receive it and try it on for actual wearing pictures.
2 piece undersuit.
Top:
Welded seams that will not tear, rip or pull apart...ever!
The back zipper closes from TOP to Bottom, and there's a snap buckle that the cod piece tension cord attaches to. The tension cord is tightened and the excess can be trimmed off.
Notice the heavy duty stitch and seam work. This entire undersuit was constructed and built with the premise that it's for costuming and given the needed elements from a production stand point to make it work as such, basically so it does it's job...doesnt sag and holds firm.
Bottom:
Has built in suspenders to ensure that they'll hold the legs in place firmly and without causing added 'bulk' by using snap on suspenders that actually could tear or ruin the neoprene.
Even though it's not easy to see this yet, the lower leg is long enough to go into the boots, but cut off without going down to the ankles. It's not necessary and only causes added heat as you'd have your socks and boots on to cover that area anyhow.
The neoprene itself is textured just like the Begins undersuit. It's very subtle but it is there. Also this neoprene is paintable so anyone needing it to be a different color for it to blend into whatever it is they desire, it can be done.
For the production suits we'll be pigmenting the adheisive so it blends into the undersuits better.
Just something new, so please enjoy!
Rimma (Dave's wife)
2 piece undersuit.
Top:
Welded seams that will not tear, rip or pull apart...ever!
The back zipper closes from TOP to Bottom, and there's a snap buckle that the cod piece tension cord attaches to. The tension cord is tightened and the excess can be trimmed off.
Notice the heavy duty stitch and seam work. This entire undersuit was constructed and built with the premise that it's for costuming and given the needed elements from a production stand point to make it work as such, basically so it does it's job...doesnt sag and holds firm.
Bottom:
Has built in suspenders to ensure that they'll hold the legs in place firmly and without causing added 'bulk' by using snap on suspenders that actually could tear or ruin the neoprene.
Even though it's not easy to see this yet, the lower leg is long enough to go into the boots, but cut off without going down to the ankles. It's not necessary and only causes added heat as you'd have your socks and boots on to cover that area anyhow.
The neoprene itself is textured just like the Begins undersuit. It's very subtle but it is there. Also this neoprene is paintable so anyone needing it to be a different color for it to blend into whatever it is they desire, it can be done.
For the production suits we'll be pigmenting the adheisive so it blends into the undersuits better.
Just something new, so please enjoy!
Rimma (Dave's wife)
