Modelling and Painting

[RetrogradeOrbit]

Totally ready... light blocked with chrome paint.

 

[RetrogradeOrbit]

Here goes nuthin'...
Got to take electrical safety seriously...


A still taken from a video I shot to test the lights.

One in, maybe this will actually work!

Each time I have to bend the wires on one of those leds, I cry inside...


That's it for now, I have to wait for the Tulip "paint" to go hard before I can fit any more leds. It's basically liquid rubber. Thought it was the best stuff to use so as to not damage the insanely thin wires...

 

[RetrogradeOrbit]

She may not look like much but she's got it where it counts...!
Gave up on the Tulip paint and used 5 minute epoxy resin instead. Want this done today!


And because you know you love it, I've done a video too...

 

[RetrogradeOrbit]

And because I had to wait for glue to dry bit by bit with the scanner, I got on with this outstanding task...

Bought more silver metallic paint and applied a couple of fresh coats because it looked patchy before.


This is after the first top coat of 2x clear gloss.


This is after the 2nd much heavier coat of 2x clear gloss. Gawd, I hope it dries as shiny as that...!

 

[MissMarvelous]

[/QUOTE]

That deep breath hahaha

Darn I wish i were THAT skilled at something.

 

[RetrogradeOrbit]

I must mute that audio...!
Or, replace it with some royalty free music...

 

[RetrogradeOrbit]

That deep breath hahaha
Darn I wish i were THAT skilled at something.

I think that was an actual sigh of relief that the scanner leds still worked after I had finished mangling it around...

 

[MissMarvelous]

You actually edited that video... Why? Is not THAT real anymore.

Just kidding!

 

[RetrogradeOrbit]

Before...


After...

 

[MissMarvelous]

Finally!!!

Aren't they cute??? Look my "Funko" pots

 

[RetrogradeOrbit]

Wow! Those are good...
Are you going to be painting them?

 

[Dave McFly]

going through my dresser I found a set of aftermarket decals for the AMT/Ertl (now Polar Lights) Enterprise D which has name/reg numbers for other Galaxy Class ships and a 2nd sheet of JUST all the lifeboat hatches wow I forgot I had em.

 

[MissMarvelous]

Wow! Those are good...
Are you going to be painting them?

Yes! They are still a little bit wet so I have to way until tomorrow to start with the painting. I may have to put them in the oven for a while to get them really dry.

The weather is not the best these days, way too humid.

 

[MissMarvelous]

The primer stage is done! However... I forgot to second coat one of the pieces *facepalm*

No spoons have been hurt during this process.

 

[RetrogradeOrbit]

Been putting this off. It's never fun drilling holes into your model...
And there's the switch to turn the scanner on/off


Gluing it into place


Kind of looks right. Yeah I know it's upside down...!

 

[RetrogradeOrbit]

Time for the front...



And a new video, without excessive breathing!

 

[RetrogradeOrbit]

Finished, and I think this is the worst model I have made so far... I caught the nosecone on something when I was putting the glass in and damaged it.
But here are the last few pictures anyway.

 

[RetrogradeOrbit]

And the rest...

 

[RetrogradeOrbit]

Forgot these...

 

[MissMarvelous]

without excessive breathing

Haha never said excessive!!! Just deep.

 

[MissMarvelous]

Would love to get my hands on some city themed stickers and add them to the Stormtrooper and Darth Vader figures. Make a series of them.

I may be adding some cotton and birdseed so it grows and looks as if it were hair.

 

[RetrogradeOrbit]

It's K.I.T.T. at night...


It's K.I.T.T. at day...

 

[RetrogradeOrbit]

^^^
Alterations made to videos, hopefully they won't be taken down for copyright violations...

EDIT
Please note the continuing lack of breathing...

 

[MissMarvelous]

Please note the continuing lack of breathing

You will have to breathe at one point... Otherwise... Kaput :P

Have you been reached out by a new poster? A French young dude who is also a modeler? He started posting at the diner and I mentioned something about you.

 

[RetrogradeOrbit]

I saw that, but nothing as yet...

He should post whatever he is working on in here!