World Web shooter shop class - Part 1

[White_widow]

I have a video. It makes a brief cameo. I don't fire it. It was clogged by the time I videoed it.

 

[spidey44]

Heating coil, A while ago Symbiote-Man and I had a discussion about that, but I don't remember much I think this should help.

http://jacobs-online.biz/nichrome_wire.htm

 

[MSaleem]

Hey WW, you posted a link on a heated coil. I understood everything, except for the part that says "heating source". Any suggestions on what I can use for that? A tutorial / link would be helpful

Spidey44 - I know that I need Nickel Wire, I just need a "heating source" where the website that shows me is't too specific

 

[Spider-Phantom]

Ooh, who's black widow? The opposite of White widow?! Hahaha!!! Anyway I just came to check on everyone. Any progress. I'm going to England tommorow so you won't here from me for a month starting tommorow. I,m here for now...

 

[White_widow]

Ok. Well a heating circuit is rather easy. The battery connects to a copper wire, then to the chromium wire, back to a copper wire, to a switch, and back to the battery. The chromium wire gets really hot as the circuit is made. Insulate all the wires.

 

[Spider-Phantom]

So, no progress?

 

[spidey44]

Did you scroll down?

 

[spidey44]

Well, I made a little progress, I'm almost finished with my prototype.

 

[Spider-Phantom]

White_widow - can you post a link to your video? And how well, far, and strong, does it fire/go?!?!?!
All - I am a guy

 

[White_widow]

http://realwebtech.webs.com/apps/videos/videos/show/16727421-s-p-i-d-e-r-and-spinneret

The it's durable, other than the clogging, strength remains to be tested, and as for far, I didn't get to do it any justice. Because I only fired water before I destroyed the pressure vessel, I only tested that. If you have too much pressure, the water mists. So I can't really know until I get another pressure vessel.

 

[Iron_spider]

Spidey44
that sounds good, but there are few problems. Like the bag is going to be sealed around the outer can, so if the co2 is in the can but not the bag, then the CO2 won't propel it. Unless you manage to get the CO2 inside the bag. Also, strapping it to our arm causes the spray to point upwards. Plus it is kind of big.

Go to the link. Look at the diagram/picture. Notice you said the gas will be in the can and not in the bag, so it will have no effect on the propellation

http://www.bagonvalve.com/en/index.htm

Actually, this solves problems rather than making new ones. Ever drink a Capri Sun? If you put the straw in and squeeze it, the juice comes out, right?

Same concept. The CO2 (or whatever propellant) squeezes the bag. This way, the fluid doesn't actually have to touch the pressure vessel. And now that I think about it, you probably wouldn't have to re-pressurize it if you did it the right way.

EDIT: Oops... My computer messed up and didn't load the last two pages. Widow already explained it. My bad.

 

[Bdude101]

Nice work everyone, I will post something later.

 

[spidey44]

I wish I would've posted the idea of the bag on valve earlier, I've known about it for months,since about February.

 

[MarvelFan1]

Ooh, who's black widow? The opposite of White widow?! Hahaha!!! Anyway I just came to check on everyone. Any progress. I'm going to England tommorow so you won't here from me for a month starting tommorow. I,m here for now...

Have fun in england! Au revoir(french for goodbye)!

 

[spider 2099]

Hey guys check this dude said that he have a real web fluid http://m.youtube.com/#/watch?v=w0OyopnjU04

 

[Spider-Phantom]

Have fun in england! Au revoir(french for goodbye)!

Merci beaucoup. Vous parlez français? Je français majeur. C'est agréable de voir quelqu'un / quelqu'un d'autre parle français. C'est parler français sans que personne solitaire d'autre à parler / parler!!!!!!!!

 

[MSaleem]

You two can speak french too !! !!
nah I'm just messin with yah
sigh Google Translate

Oh and while im off topic, White Widow means a kind of weed lol t:

 

[Spider-Phantom]

Ok guys. I am done. For the rest of the month. I am done. I took apart the vacuum so I could play with the web shooter a little. The nitrogen pressure valves came in the mail today and I have replaced the CO2 with it so my web shooter doesn't freeze. It was a GREAT substitute. Exactly the same pressure, if not more. Only some clogs so far but not many. The trigger uses two fingers and the web is PVG based. But before I leave at 2:00 tommorow July 12th, can somebody find an easier way to retract a web. My way is very slow and get's stuck a lot!!! : (!!!!!!!!!!

 

[Spider-Phantom]

Actually. I major in speaking French.

 

[MarvelFan1]

Merci beaucoup. Vous parlez français? Je français majeur. C'est agréable de voir quelqu'un / quelqu'un d'autre parle français. C'est parler français sans que personne solitaire d'autre à parler / parler!!!!!!!!

votre façon les bienvenus. Malheureusement, je ne parle pas français, je suis en utilisant Google Translate. En fait, je suis en utilisant Google translate que je t'écris cette lettre

 

[MSaleem]

Actually. I major in speaking French.

Ididnt mean to offend you or anything, I was just messing around

 

[nolder]

Hey guys check this dude said that he have a real web fluid http://m.youtube.com/#/watch?v=w0OyopnjU04

this is the web fluid he bought.
http://biothread.webstarts.com/_.html

$900 and sold out, plus the paypal button is an image. its on a free hosting website. plus the box was sealed with duct tape, which isn't illegal, but shipping places like clear tape. AND you know what was used to protect the vile from shipping? walmart bags. That NEVER happens. All of this leads me to believe its a scam

 

[nolder]

Ok guys. I am done. For the rest of the month. I am done. I took apart the vacuum so I could play with the web shooter a little. The nitrogen pressure valves came in the mail today and I have replaced the CO2 with it so my web shooter doesn't freeze. It was a GREAT substitute. Exactly the same pressure, if not more. Only some clogs so far but not many. The trigger uses two fingers and the web is PVG based. But before I leave at 2:00 tommorow July 12th, can somebody find an easier way to retract a web. My way is very slow and get's stuck a lot!!! : (!!!!!!!!!!

perhaps a small electric motor with a spool attached to the rotating part?

 

[Spider-Phantom]

Ididnt mean to offend you or anything, I was just messing around

I know. Don't worry. I just love using exclamation points for some reason!!!!!!! !!!!!!!!!!!!!!

 

[Spider-Phantom]

Hey guys check this dude said that he have a real web fluid http://m.youtube.com/#/watch?v=w0OyopnjU04

And the web is just a biothread...
That mean's it's not too sticky!!!!!!!!!!!!!