Making the perfect Spidey suit

[spidey4fun]

A little off topic.... but here's a new suit.

Still need to do the sleaves, neckline and feet.



Brad.

 

[AME]

cool
what's it for?

 

[SlyGuyTtjn]

cool
what's it for?

It Deadpool... duh

 

[spiderfan_ENT]

hey every1, I have a Dare Devil suit available, Margaret wait Spider-man 2 costume with separate mask (made to fit some 1 taller) and Im letting go my spidey4fun printed suit with custom lenses.

I can do a combo deal, or separate.

i will post pics, I just want to know if any1 is interested?

 

[spiderfan_ENT]

 

[eledoremassis02]

Any suggestions on the best way to wash a suit? Mine is 3D printed webbing.

Thank you!!

 

[spidey4fun]

Soapy warm water.... by hand. If you've aqua shoes in the suit., they can get wet no probs. Just need to be careful of frames / lenses glued to the suit. You dont want bent mesh for lenses.

 

[eledoremassis02]

Thanks! I hear you loose color tho..any way of avoiding that?

 

[AME]

It Deadpool... duh

ok, thanks

 

[spidey4fun]

Thanks! I hear you loose color tho..any way of avoiding that?

If the suit is dye-sub onto poly/lycra no colour will be lost.

 

[JESTER FX]

here is a picture of a prototype black cat costume i am working on and also some pix of a printed webbing suit me and spidersuit maker did and also a close up of a print we did with my spider and webbings on it

 

[Taylor]

Nice work JesterFX. The webbing looks great (both printed and raised) and I DEFINATELY like the catwoman suit. Your Girlfriend? Is the tatoo for real or fake?

 

[JESTER FX]

thanks taylor and no its noy my girlfriend it is a friend that does conventions with me and yes the tattoo is real me and all my friends are tattooed and pierced freaks lol

 

[spiderfan_ENT]

spidersuitmaker (mike) if your out there, or read this could you please contact me, desperate need of a new suit, its been over 7 months since i sent the payment. please contact me.

 

[JESTER FX]

ok guys so here thay are a finished set of the frames and lenses. the frames are made from a clear resin with graphite powder mixed into the resin the lenses are cut from a clear pollycarbonate oakley UV resistant lense and the mesh is a micro fine mesh airbrushed black on the back and pearl white on the front it is 100% film accurate. i have the tabs being made now and the magnet is being fitted as well. i only have 2 pairs as of now if any 1 is inturested please PM me as i dont know when i will have more made. hope you all enjoy

 

[nameless_hero]

How's the visibility?

 

[JESTER FX]

it is not 2 bad it makes things a tad bit dark but in a normally lit room or out side it is perfect the way i was makin my old frames thay had 2 layers of regular mesh on it and the visibilaty was the same as this mesh if u are use 2 regular mesh it will take some getting use to but it is well wort it i cant waight 2 put them on my new costume and i am going 2 be using this mes on my regular frames that dont have the lenses just becaus the micro mesh makes it look more accurate

 

[JESTER FX]

here are some pix of the lenses and fraims on a hard resin display face shell i hope 2 have the new face shell done very soon that will have the magnet hole in it and the grove around the eyes to fitthe lense

 

[Gundam]

Ok Everyone I want to make an important urgent announcement and Ernie (SpideyFan27) if you are reading this you better be sure to read it well! Apparently me Taylor and maybe more than likely other people which most may be on this board if you have ordered from him in the past or recenlty just got screwed by Ernie. If anyone one who has ordered from him near Halloween like me or in the past 8 months and have not recieved there order like Taylor who hasn't recieved his refund from Ernie or answered any of his messages for the past 8-9 months just got screwed by him as well. Dont expect him to make your order even though he says that he is making it or expect for your money to be refunded because it turns out to be that Ernie who goes by SpideyFan27 is a total Fraud. We tried contacting him by email, his cell # and home # and no Answer from him it appears that his #'s are disconnected. If you guys don’t seem to realize it (which I didn't until now) most of his work that he posted on the board is not really his, is fake, or someone else's work I wish I would have known this sooner due to the fact that I paid him $200 for the 2 masks and Urethane Spiders I ordered from him on Oct 2 as well as Taylor who paid him $200 for the mask he ordered from him 8-9 months ago calling him back and no answer from him or has even gotton his $ refunded. No wonder why he was always trying to make deals with me on masks and Urethane Spiders. The sad thing to say was that we (Me and Taylor and maybe others) supported him as well and we thought he was a good friend just like others thought so. I just would have never expected this from him. So Im advising everyone not to order from him anymore or have trust in him anymore. And Ernie (SpideyFan27) you better hear this because we are not going to be left empty handed you better refund are money back or Im taking this to the headquarters on this board and will be filing law suits against you!

I saw Ernie on MSN last night maybe you could catch him there.

 

[JESTER FX]

ok so i spent most of 2 day at starbucks tweaking the face shell so that way it will fit the fraims with the lenses in it. sorry the pix are not the best but i took them with my cell. so now the new fraims and lenses are a perfect fit and as in the original i added the groov 4 the lense and i will be doing the final smoothing in the morning and adding the magnet hole. i hope to have it molded and sent off 2 the vacuum-former by the end of the week. any questions PM me

 

[Taylor]

Crap, I almost choked on my own drool! Why don'tcha warn a fella! Seriously JesterFX, I'm running out of glowing adjectives to describe your work. How about "Superfantabulousterifficolosalicious!!!"!!!!!!!!! See what you've done? Now I have to start making up my own adjectives!

 

[spidey4fun]

Looking good Justin!! It's probably a little hard to determine at the moment.. but what size head you figure the face shell will fit? Are you thinking fibreglass or Vacuum form? Im loving your whole project.

Brad.

 

[JESTER FX]

thanks brad. well if u remember when i first did the shell i sculpted it off of my life cast and i have a 23inch round head. when i made the mold and did a fiberglass shell i saw some changes i wanted 2 make and with having 2 make changes 4 the new lenses i decided 2 do a clay pour out of the silicone mold that way it would make it easier 4 me 2 move all around 2 get a better view of thingas and make it easier 2 mold. as 4 the final piece i am going 2 make vacuum-formed pieces. i know in the movie it was a red plastic but i am going 2 go with a white plastic and just paint them that way i can offer them for both red and black suits

 

[spidey4fun]

Excellent.. Looking forward to seeing your finished work.

 

[JESTER FX]

thanks i have been working on the lenses and the face shell on and off for 2 years now really studdying all the behind the scenes books and dvds still fraiming every angel i could and am really glad i have taken as long as i have i think now i truly am happy with it and think that i really managed 2 hit the shell and lenses dead on