World Web shooter shop class - Part 1

[spidey2365]

How do I post pictures?
Also I got the motor

 

[spidey2365]

http://technoweb.deviantart.com/#dsb677w

 

[spidey2365]

It isn't done yet but iam making it tonight

 

[pllagunos]

brilliant but how the fluid will pass by the nozzle I mean the motor will disturb I like your nozzle tell us how to do it gratings

 

[spidey2365]

I have been thinking about that

 

[spidey2365]

There will be a sepperate chamber

 

[spidey2365]

Just to clearify does the nozzle spray in to the spinner

 

[pllagunos]

how you do the nozzle

 

[pllagunos]

and were you get the motor

 

[pllagunos]

I don't understand the separeate chamber can someone explain me

 

[spidey2365]

bassicly you have the motor behind the sepperatte chamber where the fluid goes. the motor rotates the sepperate chamber spinning the spinnerette the most.

 

[spidey2365]

http://technoweb.deviantart.com/art/car-321153173

 

[Wadaltmon]

bassicly you have the motor behind the sepperatte chamber where the fluid goes. the motor rotates the sepperate chamber spinning the spinnerette the most.

However, for the spinnerette to actually spin, it needs to be mounted to some sort of axis. However, for the fluid to go through the spinnerette, the axis would have to be in the same place as the axis.
There are two solutions to this problem. The first is to make the tube leading up to the spinerette to be coaxial, as in having the axis for the spinnerette within the tube that goes into the spinnerette. The second is the make the tube that leads up to the spinnerete act as the axis as well as the tube. However, this would either mean a complex gear system within the shooter or that the canister needs to be directly in-line with the solenoid and spinnerette.

 

[SUP]

Great design Sup!

Tnxs, @MarvelFan, this design was created by someone i know from Deviantart. Amyway, what do ya think ??

 

[pllagunos]

tnxs for the idea tell me if is like this what you want http://pllagunos.deviantart.com/art/idea-321186138

 

[WallCrawler3344]

Oke new idea; why not put the Spinneret INSIDE the axis. It'd be like, spinneret, axis OVER top of it, weld the axis airtight over the point of which the spinneret exits the fluid chamber, then, the spinneret can be welded to the spinning part of the axis, so it spins with it. Only thing is, the hose attached to the spinneret will spin inside of the chamber, and might stir it up more than necessary. I'm making sense?

 

[pllagunos]

I don't understand what is the axis

 

[WallCrawler3344]

I don't understand what is the axis

A spinning device that will form many webs into one:P

 

[Wadaltmon]

I don't understand what is the axis

It is the part that the spinneret rotates around, so it stays in the same location but still spins correctly.

 

[pllagunos]

like this is the spineret http://pllagunos.deviantart.com/#/d5b99e9

 

[WallCrawler3344]

like this is the spineret http://pllagunos.deviantart.com/#/d5b99e9

How would it spin without the fluid staying at the wall of the chamber due to the centrifical force? My idea is, have a bunch of strands close together, and have a rung at certain points down the line! If you look a a Spidey comic today, rarely will you see a straight line; it looks as though someone took strands of silly string and tied them messily together. The rungs would keep them together, and what's more, it'd be serve as a grip, so the strength required to stay on the webline isn't as much

 

[WallCrawler3344]

Not to be rude about your design. It's a good idea, but again: centrifical force.

 

[spidey2365]

http://youtube.com/watch?v=90nmYlaIf31

 

[koopaspider]

Hi, if i want to make a web rope. (like spidy swings on. But Im not gunna swing on it) how should i place the holes on the spinneret?
should I have one big hole in the center and a few small holes closely around the big one?
and i cant seem to find a small 1/4 solenoid valve.
Ive looked on amazon and at lowes, but cant find anything small enough
I hope y'all can help

 

[pllagunos]

can someone give me ideas about the cartridge how I do it I mean were I get a pressure vessel ( I'm mexican I don't have earthfare)