World Web shooter shop class

[TheWeb]

You silly peoples...just silly
there is no best formula, there is only better.
It should be noted by everyone that peter never used "one" formula.
He had a main swinging formula which he used every now and then to use impact webbing on the bad guys with.

He often made several special formulas for certain circumstances like dealing with shocker, hydroman, doc ock, etc.
so just keep that in mind.
there is no "best" formula

 

[TheWeb]

also Peterwebbedhead you have a major gap in your design.

1. solenoid valves have to be controlled by a microcontroller [X]
2. In order to manipulate the webbing the nozzle has to be spinning at certain rpms
highest rpm = web line(for swinging)
-other high rpm = web ball (impact webbing, web bullets, web balls)
-- lower rpm = web "net" (not an actual net, but the web spreads and is hard to get off REALLY hard)
This is really important because it allows for full manipulation over the web, but you can't do this if you're not using a microcontroller, you also can't control the solenoid valves.
I'm just curious on how much you thought that through.

[EDIT] didn't see the "using with arduino" or w/e at the top, ignore the part about the microcontroller, all about rpms now..

 

[owlboy01]

Has anyone thouht about lets say ur about to swing for the first time u shoot the web let yourself swing u try to let go and DOINGGG your stuck to the web have we resolved this problem,still an issue,forgotten mistake, or something

 

[peterwebbedhead]

also Peterwebbedhead you have a major gap in your design.

1. solenoid valves have to be controlled by a microcontroller [X]
2. In order to manipulate the webbing the nozzle has to be spinning at certain rpms
highest rpm = web line(for swinging)
-other high rpm = web ball (impact webbing, web bullets, web balls)
-- lower rpm = web "net" (not an actual net, but the web spreads and is hard to get off REALLY hard)
This is really important because it allows for full manipulation over the web, but you can't do this if you're not using a microcontroller, you also can't control the solenoid valves.
I'm just curious on how much you thought that through.

[EDIT] didn't see the "using with arduino" or w/e at the top, ignore the part about the microcontroller, all about rpms now..

Hmmm.....OK thanks TheWeb I'm gonna do some tweaks to the shooter.Microcontroller,turbine in nozzle,the nozzle needs a little time first but thanks!

 

[White_widow]

Guys, Guys, Guys. I feel like some of you are in deep need of a chill pill. All I hear from this forum is you forgot this, oh and you forget this, and you seem to have missed this.

No.

Give each other some credit. I believe that a good deal of people that know what they want to FOCUS on. We've all seen the cartoon, and know what we want. We keep a good deal at the back until after we prioritize. As such, we contribute notices. From what I understand, solenoid valves don't need chips because it's an electromagnet. A circuit. Could a microcontroller be useful, ABSOLUTELY. There is no other way to make the carousel feature. IS is necessary? not that I know of. Is it possible for the webbing to stick to your hand? Good question. Why don't you "Swing" on into the formula forums and debate glues that don't bond to skin or whatever glove you choose to wear.

The newbies on the forums may not have thought of everything, but come now, I do believe they have common sense. Until the first prototype is on the table, in video form, how can we upgrade nothing? We can worry about fancy attachments and everything once we've got a pressure vessel, a palm actuated valve, and a spinneret.

EDIT: Also, I think that the cartridge/ pressure vessel should be investigated. I see a lot of designs with the movie shooter stuff, so cartridges should be high on the list. For movie shooter people that should be a priority, because unlike me, a lot of people are going to avoid using a canister. Final note, that cartridge can't be made from PVC with our current formula. The web could tell you why.

 

[MarvelFan1]

good point white widow. im gonna start my web shooter by my summer break and i promised i would get it done by the end of summer or the end of september if i could!

 

[Human Spider]

I'm going to start making a web shooter. I'm new to this sort of thing so I have to know: What are the parts needed to make a basic web shooter?

 

[White_widow]

1.)Pressure vessel
2.) valve with wrist trigger.
3.) bracelet.

For a BASIC shooter, that's what you'll need.

 

[peterwebbedhead]

1.)Pressure vessel
2.) valve with wrist trigger.
3.) bracelet.

For a BASIC shooter, that's what you'll need.

Hey whiteWidow could you explain how an electronic fluid gauge actually work?Because I going to start on the webshooter's green led gauge.

 

[White_widow]

I don't know exactly. Electronics is not really my cup of tea. However, here is an idea.

http://img.directindustry.com/images_di/photo-m2/bourdon-tube-pressure-gauges-570885.jpg

this is an average air valve. You need to find a filter that can attach to the gauge. you would need a t-joint and a few rings to make it work, but it would be very reliable, and easily replaceable. You can also mess with the face to make it look like a big watch.

 

[White_widow]

wait, I have an idea. It's simple but it MIGHT do something if you can do this.

So there are going to be springs of differing compressible strength. There are going to be five of them. The ends of the sticks will enter into the pressure vessel or the fluid line. They will be sealed in of course. Now if the pressure is high enough, the springs will compress, and the front end of the rod will hit a switch that activates a light switch. Each will get it's own led.

If the pressure was high, all of the light switches will be touched. When it drops like 20 psi, the rod will retract into the fluid line and turn off the light.

 

[TheWeb]

I'm sorry, i tend to forget that not everyone has been on here very long. i just feel like people are underestimating the precision that goes into making the shooters, you can't expect the formula to do everything for you.

 

[Tyseg1cia]

You silly peoples...just silly
there is no best formula, there is only better.
It should be noted by everyone that peter never used "one" formula.
He had a main swinging formula which he used every now and then to use impact webbing on the bad guys with.

He often made several special formulas for certain circumstances like dealing with shocker, hydroman, doc ock, etc.
so just keep that in mind.
there is no "best" formula

Good lord dude calm the hell down... what is the most efficient frackin formula for the moment of this moment today tuesday 2012 29th

 

[Tyseg1cia]

im sorry i was mean..... i have anger problems.

 

[Iron_spider]

Woah... Okay, everybody here needs to take a deep breath. Seriously, relax guys. We're all working together, remember? Let's all calm down and take this one step at a time...

 

[Ryleyw]

How would the 2012 trigger activate the web shooter?

 

[Ryleyw]

I got a nozzle and turbine but when I poured my web fluid in it,it clogged the nozzle up:/

 

[MarvelFan1]

i have two questions for peter:
-where can i buy this "anti-adhesive and how much would it cost?
-how would i put in and mix the super glue with the other ingredients?

 

[owlboy01]

May someone tell me everything i need to know to help or at least look up because im just a kid if i know i can give good ideas that people on the could try

 

[White_widow]

May someone tell me everything i need to know to help or at least look up because im just a kid if i know i can give good ideas that people on the could try

uhhh... I was referring to polystyene. Styrene is just easier to type.

Guys, before you just try to jump into the formula, You NEED to have a baseline knowledge. Read this site, get familiar with it, and you will have the basic understanding of polymeric science:

http://pslc.ws/macrog/level2.htm

read levels 2-4

just please research something. We all learned by reading up on it. It's a process. Try this first:

http://entertainment.howstuffworks.com/silly-string1.htm

 

[Symbiote-Man]

May someone tell me everything i need to know to help or at least look up because im just a kid if i know i can give good ideas that people on the could try

No offense, but it's not that hard. Don't be lazy.

I'm "just" a kid too, you know. That's no excuse.

 

[peterwebbedhead]

wait, I have an idea. It's simple but it MIGHT do something if you can do this.

So there are going to be springs of differing compressible strength. There are going to be five of them. The ends of the sticks will enter into the pressure vessel or the fluid line. They will be sealed in of course. Now if the pressure is high enough, the springs will compress, and the front end of the rod will hit a switch that activates a light switch. Each will get it's own led.

If the pressure was high, all of the light switches will be touched. When it drops like 20 psi, the rod will retract into the fluid line and turn off the light.

hmm....its quite intricate but I'll try that idea and tell you how it go.

 

[Human Spider]

Thanks, White Widow. I'll start working on a formula and some shooters.

 

[Human Spider]

I just thought of something. It's more complex than the web shooters we all know and I do not plan on trying to make it. What if there is a web shooter that's larger than Peter Parker's, but it takes in different kinds of proteins and spins them into several strands?

 

[peterwebbedhead]

I just thought of something. It's more complex than the web shooters we all know and I do not plan on trying to make it. What if there is a web shooter that's larger than Peter Parker's, but it takes in different kinds of proteins and spins them into several strands?

What do you mean?